This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X25, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X25
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X25 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X25 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X25
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X25
A double acting compact cylinder with a rod leaving both covers, the ACPD32X25 delivers 345.6 N in either direction at 0.5 MPa (483.8 N at 0.7 MPa) because both strokes work on the rod-side area. The 32 mm bore takes a 12 mm through-rod with a female M8x1.25 thread, and the 25 mm stroke suits short-reach tooling. Its hard-anodized aluminium body follows the ISO 21287 short format, cutting roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit.
This model is discontinued; the current-production direct is the ACED32X25, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag. A fixed TPU bumper sits at each end, and travel runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Note that no magnet is fitted on this code; order the -S variant if you need CMSE / DMSE switch sensing.
Airtac ACPD Double Rod Compact Cylinder ACPD32X25 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X25 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X25 |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X25 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X25
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X25 Is Used
Compact jig clamping
The symmetric 345.6 N push and pull at 0.5 MPa clamps machined aluminum brackets in a drill fixture, with the short ISO 21287 body fitting inside the jig frame.
Bidirectional part pusher
Equal force both ways lets one 32 mm through-rod push rejected cosmetic bottles off a line in either stroke direction without a return spring or reversed porting.
Dual-end position flagging
With the -S magnet ordered, CMSE / DMSE switches read both rod ends, so a packaging machine confirms extend and retract on the same 25 mm stroke.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X25 with the ACED32X25
At 345.6 N per side at 0.5 MPa, the 32 mm bore handles clamping and transfer loads around 20 kg; step down to the 25 mm bore (206.2 N) for lighter fixtures or up to the 40 mm bore (571.8 N) when you need more margin. The 25 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it is a catalog item. Mount with FA/FB flange or LB foot brackets on the ISO 21287 face, and remember a plain through-rod cylinder drifts when air is lost - add a rod lock or pilot check for held loads. For new projects, specify the ACED32X25 instead, as this ACPD code is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACED32X25
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X25 FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, on the rod-side area of the 32 mm bore. Maximum force at 1.0 MPa is 70.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
Order the ACED32X25, the current ISO 21287 successor: swap the P for an E and you get the same 32 mm bore, 25 mm stroke and force class in a matching short body. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to the older DIN-standard format. FA/FB flange and LB foot brackets bolt to the same face family.
Request a Quote for the ACED32X25
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X25 replacement — usually within 7-8 hours.