This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X275, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X275
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X275 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X275 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X275
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X275
This ACPD32X275 is a double acting, double-rod compact cylinder in the discontinued AirTAC ACP family: a rod exits both covers, so the through-rod pushes and pulls with identical force of 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) in either direction. The 32 mm bore runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof tested to 1.5 MPa (215 psi), with speed range 30-500 mm/s and a fixed TPU bumper at each end. Its 275 mm stroke is longer than the 200 mm standard limit for this bore, so it is a made-to-order build.
The hard-anodized aluminium body keeps the ISO 21287 short format, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, which helps when a long-stroke actuator must still fit a tight gantry or guard. The rear rod is handy for carrying a sensor flag or balancing side load, and the female M8x1.25 rod thread accepts standard knuckles. Note there is no magnet fitted; the optional -S code adds one for CMSE / DMSE switches. This model is discontinued; the current direct is ACED32X275 - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD32X275 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X275 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X275 |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X275 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X275
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X275 Is Used
Reciprocating conveyor pusher
The through-rod pushes cartons off a belt then retracts with the same 345.6 N at 0.5 MPa, so one valve setting works for both strokes on a packaging line.
Gantry position flag carrier
The rear rod on this 275 mm stroke unit can carry a trip flag past a CMSE switch (with the optional -S magnet) to confirm end positions on an assembly gantry.
Fixture clamp with equal pull-back
Clamping a machined housing in a drill jig needs the same release force as clamp force; the rod-side area on both sides guarantees it, with the TPU bumper softening each end.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X275 with the ACED32X275
Size both ways: if 345.6 N per side at 0.5 MPa is more than the job needs, the ACPD25 at 206.2 N is lighter on air; if you need headroom, the ACPD40 delivers 571.8 N. Remember a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check for held loads. FA/FB flange and LB foot mountings bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switch sensing. Since this 275 mm stroke is non-standard and the model is discontinued, order the ACED32X275 and confirm the ISO 21287 dimensions.
Replacement checklist
- ✓ Current-production ACE → ACED32X275
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X275 FAQ
Because it is a double-rod cylinder, output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa per direction, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 275 mm stroke is a made-to-order length above the 200 mm standard for this bore.
Sensing requires the optional -S magnet code; without it no magnet is fitted and CMSE / DMSE switches cannot be used. The ACPD family is discontinued, so for new builds order the ACED32X275 - the same bore, stroke and force class in the current ISO 21287 ACE series - and confirm the mounting dimensions before the swap.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X275
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X275 replacement — usually within 7-8 hours.