This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X35, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X35
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X35 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X35 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X35
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X35
Double acting with a rod leaving both covers, the ACPD32X35 pushes and pulls with identical force because each stroke works on the rod-side area: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction. The 32 mm bore drives a 12 mm through-rod on a 35 mm stroke, with a fixed TPU bumper at each end and speeds from 30-500 mm/s. Note this model is discontinued; the current direct is the ISO 21287 ACED32X35, so confirm mounting dimensions before swapping.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guarding where a full-length body cannot. The hard-anodized aluminium body carries a S45C hard-chrome rod, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag. No magnet is fitted on this code; order the -S version if you need CMSE or DMSE switches.
Airtac ACPD Double Rod Compact Cylinder ACPD32X35 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X35 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X35 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X35 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X35
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X35 Is Used
Symmetric CNC fixture clamping
Equal 345.6 N force on both strokes lets one cylinder clamp and unclamp a machined housing with the same grip, and the through-rod keeps the tool plate from rotating under side load.
Push-pull packaging transfer
A 35 mm stroke at 30-500 mm/s shunts cartons between conveyor lanes, and the rear rod can carry a flag read by a CMSE switch when the -S magnet is ordered.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X35 with the ACED32X35
At 345.6 N per side at 0.5 MPa, this 32 mm bore suits clamping and transfer loads up to about 207 N with margin. Step down to ACPD25X35 (206.2 N) for lighter fixtures, or up to ACPD40X35 (571.8 N) if the job grows. FA/FB flange and LB foot mountings bolt to the standard face, and the optional -S magnet enables CMSE / DMSE position switches. This model is discontinued, so specify ACED32X35 as the current-production replacement and verify the ISO 21287 footprint first.
Replacement checklist
- ✓ Current-production ACE → ACED32X35
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X35 FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so force is equal both ways: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi).
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FA/FB flange or LB foot options. The ACPD32X35 is discontinued; the current direct is ACED32X35 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Request a Quote for the ACED32X35
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X35 replacement — usually within 7-8 hours.