Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX170-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke170 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S
The AirTAC SAIJ32X170-75-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 170 mm stroke that can be fine-tuned backward by up to 75 mm, yielding a highly flexible 95-170 mm usable travel window.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. It uses a PT tapered G1/8 port and relies on the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S Is Used
Machine Commissioning
Dial in the exact 95-170 mm end position during setup without swapping cylinders or machining external stoppers.
Product Changeover
Quickly adjust the retract stop distance on packaging lines when handling different product sizes on the fly.
Variable End Stops
Set precise retraction limits for delicate pick-and-place operations using the 75 mm rear adjustment screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S the Right Cylinder?
If your setup demands less force, stepping down is not an option in this frame size, but stepping up to a 40 mm bore increases the push force to 628 N. The rear adjuster acts purely as a travel stop for deceleration; it does not hold the load without live air pressure. For secure load-holding without continuous air, consider an SAIL air-released lock or BSAI clamp-lock cylinder.
Because the 170 mm stroke is below the 300 mm threshold, side-loading stress on the 12 mm rod is moderate, but an external guide is still recommended for heavy offset loads. This configuration is dimensionally interchangeable per ISO 15552, featuring a PT port thread and an -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S FAQ
It features a rear adjusting screw that acts as a stopper, allowing you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 95 to 170 mm, enabling fine-tuning of the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX170-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.