Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX190-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke190 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50
The AirTAC SAIJ32X190-50 is a double-acting, adjustable-stroke ISO 15552 profile cylinder featuring a robust 12mm SUS304 stainless steel rod and PT tapered port threads. A rear-mounted stroke adjuster allows you to dial back the 190mm nominal travel by up to 50mm, creating a precise 140-190mm usable window for on-the-fly end-position tuning.
The adjuster acts purely as a mechanical stop to set the retract distance, meaning it will not hold a load without continuous live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50 Is Used
Machine Changeover
Quickly fine-tune the 140-190mm travel window during product size transitions on a packaging line without adding external stops.
End-Position Trimming
Dial in the exact retract distance at commissioning using the rear adjuster, avoiding mechanical dead-ends or cylinder replacement.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50 the Right Cylinder?
Choose this SAIJ32X190-50 when your machine setup requires variable end-stops or frequent product changeovers without swapping cylinders. Conversely, if your force requirements drop, the smaller SAI series lacks this built-in adjustment flexibility.
For load-holding applications without live pressure, this cylinder is insufficient as the rear screw is a stop rather than a lock; consider an AirTAC SAIL or BSAI series instead. This model uses PT tapered G1/8 ports, omits the magnet for sensors, and supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) while omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50 FAQ
At 0.7MPa, the push force increases to 563N.
The rear adjuster screw acts as a mechanical stop that can shorten the 190mm nominal stroke by up to 50mm, giving an effective travel window of 140-190mm. It requires live air to function and does not lock the load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.