Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX210-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S
The AirTAC SAIJ32X210-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel down from 210 mm to a 190-210 mm window. The integrated magnet supports position sensing.
This adjustable-stroke design lets you dial in the exact retract end-position during commissioning without swapping hardware. The rear screw acts purely as a travel stop for the air cushion and cannot hold the load without live air. It uses a PT G1/8 port and shares the standard ISO 15552 footprint, omitting FB, CA, CB, and CR mounts.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S Is Used
Machine Setup
Fine-tune the 190-210 mm travel window during commissioning to hit exact end positions without adding external stoppers.
Product Changeover
Quickly adjust the retract stop for varying product sizes on a conveyor line without changing the cylinder.
End-Position Trimming
Use the rear screw to trim the stroke by up to 20 mm, compensating for mechanical wear or sensor drift over time.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S the Right Cylinder?
The SUS304 rod and M10x1.25 thread handle moderate side loads, but because the stroke is 210 mm, you should use an external guide to prevent rod binding. For load-holding without live air, select the SAIL or BSAI series instead of relying on the adjuster. To match this ISO 15552 cylinder, specify the 32 mm bore, 210 mm stroke, 20 mm adjustment, PT port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S FAQ
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster lets you shorten the 210 mm nominal stroke by up to 20 mm, creating a 190-210 mm travel window. It acts as a stop and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.