Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX90-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S
The AirTAC SAIJ32X90-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 50-90 mm from its 90 mm nominal stroke. The integrated magnet (-S) supports position sensing with AirTAC CMSE reed and DMSE electronic switches mounted in the dual-side sensor grooves.
This adjustable model allows precise end-position tuning at commissioning without adding external stops or swapping cylinders. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The rear adjuster functions strictly as a mechanical stop for travel deceleration and does not lock or hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S Is Used
Machine Setup Tuning
Dial in the exact 50-90 mm travel window during commissioning to perfect end-stop positions without machining custom spacers.
Product Changeover
Quickly adapt end positions on a packaging line for different product sizes by turning the rear adjuster screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S the Right Cylinder?
An adjustable stroke is selected over a fixed SAI cylinder to fine-tune variable end stops during machine setup or product changeover. For load-holding without continuous live air pressure, this cylinder is insufficient as the rear adjuster is only a stop; consider an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI locking cylinders. To match this ISO 15552 replacement, specify the 32 mm bore, 90 mm stroke, 40 mm adjustment, PT port, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S FAQ
The rear adjuster acts as a mechanical stop, allowing you to trim the 90 mm nominal stroke back by up to 40 mm, creating a usable travel window of 50-90 mm. It sets the end position but does not hold the load without live air.
At 0.7 MPa, the push force increases to 563 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.