Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S
The AirTAC SAIJ32X95-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the nominal 95 mm stroke by up to 10 mm, creating an 85-95 mm usable travel window for precise end-position tuning at commissioning. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, utilizing a PT tapered port and a 12 mm SUS304 stainless steel rod for corrosion resistance. Equipped with a magnet, it supports AirTAC CMSE reed and DMSE electronic sensors mounted into the dual-side barrel grooves.
This adjustable variant uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB and CR brackets. The rear adjuster acts purely as a mechanical stop to dial in the retract position during product changeovers; it is not a lock and cannot hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S Is Used
Machine Setup Tuning
Dial in the exact 85-95 mm retract position during initial commissioning or product changeovers without machining external stopper blocks.
Light Assembly Clamping
Provides repeatable clamping at 402 N push force, with the rear screw allowing micro-adjustments to accommodate varying part tolerances.
Sensor-Driven Positioning
The integrated magnet pairs with DMSE electronic sensors in the barrel grooves to confirm end-of-stroke travel within the adjusted window.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S the Right Cylinder?
Select this 32 mm bore when an application requires 402 N of push force at 0.5 MPa and a variable end-stop, stepping down from a 40 mm bore that yields 628 N if the load is lighter and space is tight. The adjustable 85-95 mm window is chosen over a fixed-stroke SAI when you need to fine-tune the travel end during machine setup without swapping cylinders or adding external stops. For load-holding without continuous air pressure, this standard cylinder is insufficient; consider an SAIL air-released lock, a BSAI clamp-lock, or an external pilot-operated check valve instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S FAQ
At 0.5 MPa it provides 402 N push and 345 N pull force, reaching 724 N push at 0.9 MPa. The operational speed range is 30-800 mm/s.
The rear adjuster screw lets you shorten the 95 mm nominal stroke by up to 10 mm, creating an 85-95 mm travel window. It functions as a mechanical stop for fine-tuning and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.