Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX95-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S
The AirTAC SAIJ32X95-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 55 to 95 mm without external stops.
This specific SKU is built with a SUS304 stainless steel rod (option B) for superior corrosion resistance and includes a magnet for position sensing. You can mount AirTAC CMSE reed or DMSE electronic solid-state switches directly into the sensor grooves extruded on both sides of the aluminum barrel.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S Is Used
Machine Setup Calibration
Dial in the exact end-of-stroke position within the 55-95 mm window during initial commissioning without machining custom spacers.
Product Size Changeovers
Quickly adapt the cylinder's stroke on packaging lines when handling different carton lengths or product widths.
Sensor Positioning
Leverage the dual sensor grooves and built-in magnet to mount CMSE or DMSE switches for precise adjustable end-stop feedback.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S the Right Cylinder?
Choose this 32mm bore when your application requires precise end-position tuning during commissioning or product changeovers, stepping up from smaller actuators while keeping the footprint compact.
Because the stroke is 95 mm, side loads remain manageable, but always guide the load externally for optimal seal life. The rear adjuster acts purely as a travel stop and cannot hold a load without live air pressure; for fail-safe load holding, select an AirTAC SAIL or BSAI series cylinder. This adjustable model uses a PT tapered port and supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), ensuring dimensionally interchangeable per ISO 15552 compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S FAQ
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjusting screw allows you to shorten the 95mm nominal stroke by up to 40mm, creating a usable travel window of 55 to 95mm. This stopper decelerates the travel end but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.