Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX950-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke950 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S
The AirTAC SAIJ32X950-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 950 mm nominal travel to a precise 850-950 mm window. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.
This model utilizes a PT tapered port and provides variable air cushions at both ends to manage impact deceleration. The rear adjuster functions strictly as a mechanical travel stop for fine-tuning end positions during commissioning; it is not a locking mechanism and will not hold a load without continuous live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S Is Used
Long-Travel Position Tuning
Dial in the exact retraction point within the 850-950 mm range during machine commissioning without physically swapping the cylinder.
Product Size Changeover
Quickly adapt the end-stop for varying product lengths on a conveyor line by turning the rear adjustment screw.
Custom End Positioning
Set a precise mechanical stop to guarantee consistent physical contact at the end of a long-stroke assembly sequence.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S the Right Cylinder?
Choose this 32 mm bore when an application requires exact end-position tuning over a long travel distance without adding external stops. When replacing an ISO 15552 unit, match the 950 mm stroke, 100 mm adjustment range, PT port, and -S magnet.
Because the 950 mm stroke creates a long unsupported rod, an external guide is strongly recommended to prevent side-load damage. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. For applications that must hold a load without live air, consider the SAIL or BSAI series instead of relying on this adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S FAQ
The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 950 mm nominal stroke back by up to 100 mm, creating a usable 850-950 mm end-position window.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX950-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.