Airtac SAI32 Standard Cylinder SAI32AX160
The AirTAC SAI32 Standard Cylinder SAI32AX160 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX160
The AirTAC SAI32X160 is a double-acting ISO 15552 profile cylinder engineered for standardized mounting. Delivering a push force of 563 N at 0.7 MPa, this 32 mm bore unit is built around an extruded aluminum barrel without tie rods. The 160 mm stroke provides the extension needed for compact sorting and clamping tasks.
This configuration features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads, and because no magnet is specified, external position sensing relies on separate limit switches rather than the integrated sensor grooves.
Airtac SAI32 Standard Cylinder SAI32AX160 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX160 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX160
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX160 Is Used
Small Part Clamping
Secures lightweight plastic or aluminum components during secondary machining operations using its 563 N push force.
Package Diverting
Extends 160 mm to push small cartons off a main conveyor belt into secondary packaging lanes.
Gate Actuation
Operates small access doors and safety guards on automated machinery where a compact footprint is required.
Is the Airtac SAI32 Standard Cylinder SAI32AX160 the Right Cylinder?
Select this 32 mm bore when an application requires 563 N of push force at 0.7 MPa. If your project demands less than 402 N at 0.5 MPa, stepping down is necessary, while heavier loads exceeding 879 N require moving up to the 40 mm bore. Because the stroke is 160 mm, the unsupported rod length is moderate, but you should still verify axial alignment to prevent premature rod-bearing wear.
As a true ISO 15552 profile cylinder, this model serves as a direct replacement for any standard 32 mm bore, 160 mm stroke ISO 15552 cylinder with PT ports. Mounting accessories like LB foot brackets or FA flanges align perfectly to the standard interface. Note that standard double-acting cylinders drift if air pressure is lost; use an external pilot-operated check valve if the load must be held in place during an exhaust event.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX160 FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N. At 0.5 MPa, the push force is 402 N.
Yes, the SAI32X160 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other 32 mm bore profile cylinders with matching stroke and PT port dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.