Airtac SAI32 Standard Cylinder SAI32AX600S
The AirTAC SAI32 Standard Cylinder SAI32AX600S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX600S
The AirTAC SAI32X600-S is a double-acting ISO 15552 profile cylinder engineered for long-reach linear motion. It generates 402 N of push force at 0.5 MPa and 563 N at 0.7 MPa, making it suitable for light-load positioning across extended distances. This unit includes a magnetic piston for position sensing and uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance.
Because the 600 mm stroke exceeds the standard 500 mm limit for this 32 mm bore, this is a non-standard, made-to-order configuration. The extruded aluminum barrel features sensor grooves on both sides, allowing direct mounting of CMSE or DMSE reed switches without additional brackets. The cylinder operates at speeds ranging from 30 to 800 mm/s and uses PT tapered port threads.
Airtac SAI32 Standard Cylinder SAI32AX600S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX600S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX600S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX600S Is Used
Material Diversion
Extends 600 mm to push lightweight packages or divert flow on extended conveyor lines where a standard stroke falls short.
Remote Tool Actuation
Drives a clamping or gripping tool at a distance from the main machine frame, using the SUS420J2 rod to resist minor environmental moisture.
High-Bay Ejection
Executes long-throw ejection of small totes from automated storage retrieval systems, relying on CMSE sensors to confirm full extension.
Is the Airtac SAI32 Standard Cylinder SAI32AX600S the Right Cylinder?
When specifying this model, verify that the 563 N output at 0.7 MPa provides adequate thrust for your mechanism; stepping up to a 40 mm bore increases that figure to 879 N if higher force is required. The 600 mm stroke creates a long unsupported rod extension, which makes the piston rod bearing highly susceptible to bending under side loads. To prevent premature seal wear and rod deformation, use an external linear guide or a guided cylinder carriage to support the load.
This cylinder provides a dimensionally interchangeable direct replacement per ISO 15552 mounting dimensions. To match this exact configuration, select a 32 mm bore, 600 mm stroke, PT G1/8 port, and include the -S magnet option. If the application requires the load to remain suspended or held in place when air pressure is removed or exhausted, a standard SAI will drift; utilize the SAIL locking variant or an external pilot-operated check valve to secure the position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX600S FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder generates a push force of 563 N. If you increase the pressure to 0.9 MPa, the output force reaches 724 N.
No, the extended 600 mm stroke creates a high risk of rod bending under side load. You must use an external linear guide rail or a guided cylinder to absorb any lateral forces and protect the rod bearing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.