Airtac SAI32 Standard Cylinder SAI32BX1000
The AirTAC SAI32 Standard Cylinder SAI32BX1000 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX1000
The AirTAC SAI32X1000 is a double-acting ISO 15552 profile cylinder engineered for extended linear travel. Delivering 563 N of push force at 0.7 MPa, this unit is built to handle long-stroke actuation where a compact 32 mm bore is required. This specific configuration uses a SUS304 stainless steel piston rod for superior corrosion resistance and features PT tapered port threads.
Because the 1000 mm stroke reaches the maximum standard limit for this bore size, it is classified as a non-standard / made-to-order stroke. The extruded aluminum barrel includes sensor grooves on both sides, allowing for direct CMSE or DMSE switch mounting if a magnet is specified later. For higher temperature environments, Viton (H) seals can be substituted for the standard TPU.
Airtac SAI32 Standard Cylinder SAI32BX1000 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX1000 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX1000
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX1000 Is Used
Long-Reach Diversion
Pushes lightweight packages across a 1-meter conveyor belt transition using 563 N of thrust at 0.7 MPa.
Film Web Handling
Actuates a traversing guide roll over a wide web path, utilizing the SUS304 rod to prevent moisture corrosion.
High-Bay Ejection
Extends upward to eject product bins from a vertical storage rack, requiring external guides to stabilize the 1000 mm rod.
Is the Airtac SAI32 Standard Cylinder SAI32BX1000 the Right Cylinder?
Selecting this 32 mm bore over a larger 40 mm option (which provides 879 N at 0.7 MPa) makes sense when spatial constraints dictate a smaller footprint and 563 N of thrust is sufficient. At a 1000 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads. To prevent premature rod-bearing wear, implement an external linear guide or use a guided cylinder module.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders with matching 32 mm bore, 1000 mm stroke, PT ports, and standard mounting accessories like FA flanges. Note that the standard adjustable air cushions only decelerate the piston at end-of-stroke; they do not hold a load. If pneumatic pressure is lost, the rod will drift, requiring an external pilot-operated check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX1000 FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N. At 0.5 MPa, the push force is 402 N.
Yes, the SAI32X1000 is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts matching the 32 mm bore, 1000 mm stroke, and PT port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.