Airtac SAI32 Standard Cylinder SAI32BX1000S
The AirTAC SAI32 Standard Cylinder SAI32BX1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX1000S
The AirTAC SAI32X1000-S is a double-acting ISO 15552 profile cylinder engineered for long-reach linear motion. It generates 402 N of push force at 0.5 MPa and operates at speeds between 30 and 800 mm/s. This specific configuration features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for proximity sensing.
Because the 1000 mm stroke reaches the maximum standard limit for this 32 mm bore, it requires careful attention to mechanical guidance. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE or DMSE switches directly. Fluid must be filtered to 40 um, and the cylinder uses PT tapered port threads.
Airtac SAI32 Standard Cylinder SAI32BX1000S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX1000S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX1000S Is Used
Long-Reach Material Push
Pushes lightweight workpieces across a 1-meter span on an assembly line, utilizing the 402 N force and a guided external rail to prevent rod sagging.
High-Bay Diverting
Actuates a diverting arm in a conveyor system, relying on the CMSE sensors to confirm stroke endpoints over the extended 1000 mm travel distance.
Film Roll Handling
Extends to position or cut packaging film, where the SUS304 stainless steel rod provides necessary resistance against washdown environments.
Is the Airtac SAI32 Standard Cylinder SAI32BX1000S the Right Cylinder?
Selecting this 1000 mm stroke model means prioritizing maximum extension over compactness. If your application requires less reach, stepping down to a 500 mm stroke reduces overall envelope size while retaining the 402 N force. For higher force demands at shorter extensions, consider a 40 mm bore, which provides 628 N at 0.5 MPa.
At 1000 mm of extension, the rod bearing experiences significant bending moments under any side load. You must use an external guide rail or a guided cylinder to prevent premature seal wear and rod deformation. Additionally, the adjustable air cushions at both ends decelerate the piston but do not lock the load; if pressure drops, the rod will drift. Use an external pilot-operated check valve or the SAIL lock variant for position holding. This unit is dimensionally interchangeable per ISO 15552 and accepts standard mounting accessories like FA flanges or LB foot brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX1000S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. If you increase pressure to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X1000-S is a genuine ISO 15552 profile cylinder. It is dimensionally interchangeable with other ISO 15552 cylinders, matching standard mounting interfaces, 32 mm bore dimensions, and PT port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.