Airtac SAI32 Standard Cylinder SAI32BX260
The AirTAC SAI32 Standard Cylinder SAI32BX260 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX260
The AirTAC SAI32X260 is a double-acting ISO 15552 profile cylinder engineered for precise linear motion. Delivering a push force of 402 N at 0.5 MPa (563 N at 0.7 MPa), this 32 mm bore unit paired with a 260 mm stroke is well-suited for mid-distance indexing and compact material handling tasks.
This specific configuration features a SUS304 stainless steel rod (material code B) for superior corrosion resistance and utilizes PT tapered port threads. Because a magnet is not specified, it operates without internal magnetic sensing; integrate external proximity switches if position feedback is required.
Airtac SAI32 Standard Cylinder SAI32BX260 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX260 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX260
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX260 Is Used
Package Diverting
Extends 260 mm to push lightweight cartons off a main conveyor belt line with 402 N of thrust at 0.5 MPa.
Small Component Ejection
Ejects machined plastic parts from a fixture, utilizing the SUS304 rod to resist moisture in coolant environments.
Bin Sorting
Actuates a sorting arm to direct small automotive components into designated packaging bins.
Is the Airtac SAI32 Standard Cylinder SAI32BX260 the Right Cylinder?
Select this 260 mm stroke model when a compact 32 mm bore provides adequate thrust but requires a longer extension reach than standard short-stroke units offer. If your application demands less than 345 N of pull force at 0.5 MPa, consider stepping down to a smaller bore to optimize air consumption.
At 260 mm of extension, the unsupported rod is susceptible to bending under side loads; utilize external guide rails or a guided cylinder carriage to prevent premature rod-bearing wear. For operations that must maintain vertical position after air pressure is vented, note that the standard adjustable air cushions only decelerate the piston at stroke ends and will not lock the load—specify an external pilot check valve or the SAIL locking variant instead. This unit provides a direct replacement for any equivalent ISO 15552 mounting footprint, supporting PT ports and standard FA, LB, or TC accessory mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX260 FAQ
The SAI32X260 generates a push force of 402 N at 0.5 MPa and 563 N at 0.7 MPa, with a pull force of 345 N at 0.5 MPa.
Yes, the SAI32X260 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders with matching 32 mm bore and 260 mm stroke dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX260
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.