Airtac SAI32 Standard Cylinder SAI32BX60S
The AirTAC SAI32 Standard Cylinder SAI32BX60S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX60S
The AirTAC SAI32X60-S is a double-acting ISO 15552 profile cylinder engineered for compact automation. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit is tailored for precise, short-stroke tasks. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that drops seamlessly into standardized ISO 15552 mounting footprints.
This specific configuration includes a SUS304 stainless steel rod (option B) for superior corrosion resistance in humid or washdown environments. Equipped with a magnet (-S), it supports direct mounting of CMSE or DMSE sensor switches along the dual side grooves. Fluid handling requires filtered 40 um air, operating efficiently between 0.15 and 1.0 MPa.
Airtac SAI32 Standard Cylinder SAI32BX60S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX60S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX60S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX60S Is Used
Small Parts Clamping
Provides reliable 402 N clamping force at 0.5 MPa for securing lightweight machined components during secondary operations.
Package Diverting
Actuates short-stroke diverting gates or pushers on packaging lines where a compact 60 mm stroke is sufficient.
Ejector Mechanisms
Ejects small molded or stamped parts from press dies, utilizing the SUS304 rod to resist minor moisture exposure.
Is the Airtac SAI32 Standard Cylinder SAI32BX60S the Right Cylinder?
Selecting this 60 mm stroke model is ideal when working space is restricted but standard 25 mm or 50 mm strokes fall short. If your application demands less than 402 N of push force at 0.5 MPa, stepping down is not an option within the SAI range, but stepping up to a 40 mm bore yields 628 N. Because the stroke is under 300 mm, side-load stress on the rod bearing is minimal, though external guides remain best practice for rigid payloads.
As a direct replacement for any ISO 15552 cylinder, ensure your mounting hardware matches accessories like FA flanges or LB foot brackets. The PT tapered port threads must be sealed accordingly. Note that the standard adjustable air cushions decelerate the piston at stroke ends but do not lock the load; if pneumatic pressure is lost, the rod will drift. For position holding without live pressure, consider the SAIL or BSAI variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX60S FAQ
At an operating pressure of 0.7 MPa, the SAI32X60-S generates a push force of 563 N and a pull force of 345 N.
Yes, the SAI32X60-S is dimensionally interchangeable per ISO 15552, meaning it matches the mounting interface and center distances of other standard ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.