Airtac SAID32 Double Rod Cylinder SAID32X90
The AirTAC SAID32 Double Rod Cylinder SAID32X90 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X90
The AirTAC SAID32X90 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 90mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on each side, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa.
This through-rod architecture allows you to mount the primary workpiece on the front end and a position flag or cam on the rear. The extruded aluminum barrel includes sensor grooves on both sides, though this specific unit lacks the -S magnet required for CMSE or DMSE switches.
Airtac SAID32 Double Rod Cylinder SAID32X90 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X90 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X90
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X90 Is Used
Symmetric Force Transfer
Drives loads requiring identical push and pull dynamics, leveraging the equal 483N annulus force on both strokes for balanced material handling.
Anti-Rotation Slides
Uses the dual carbon steel rods to guide the payload and prevent torsional rotation without needing external guide rails.
Rear-Cam Actuation
Mounts the primary tool on the front rod end while utilizing the rear protruding rod to drive a secondary mechanical cam or limit flag.
Is the Airtac SAID32 Double Rod Cylinder SAID32X90 the Right Cylinder?
Select this 32mm bore when an application demands equal push and pull forces, such as 345N at 0.5 MPa, alongside inherent anti-rotation guidance from the twin rods. If your project requires higher thrust, stepping up to the 40mm bore provides 528N at 0.5 MPa. Conversely, if you only need single-direction force, a standard SAI single-rod cylinder is more compact.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses PT tapered ports (G1/8) and supports a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X90 FAQ
Because it is a double-rod cylinder, the rod area is subtracted from both sides of the piston, making the force equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
No, the SAID32X90 uses a reduced mounting subset of the single-rod SAI series. The compatible ISO 15552 mounts are Basic, FA, LB, TC, FTC, TCM1, and TCM2. FB, CA, CB, and CR mounts are not supported.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.