Airtac 6HV Manifold Solenoid Valve 6HV100M16F
Genuine AirTAC din rail manifold, order code 6HV100M16F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations15 to 16 valves (16F)
- Rail length350 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M16F
The 6HV100M16F covers a 15 to 16 valve bank of AirTAC 6HV100 manifold solenoid valves on a 350 mm standard DIN rail. Supply and exhaust are shared across the bank through Dia 10 push-in connections, and as a code above 10 stations it takes two supply and exhaust modules, one at each end, so pressure does not fall off along the rail. Each valve on the bank uses an M5 or 1/8 in. port.
The 6HV series was discontinued by AirTAC in January 2026 and no replacement has been named. Ask for a quote with the order code so we can confirm whether this rail can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV100M16F Technical Specifications
| Order code | 6HV100M16F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 15 to 16 valves (16F) |
| Rail length | 350 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
Choose 16F when the bank reaches 15 or 16 valves. 6HV100M14F stops at 14 on the shorter 315 mm rail; 6HV100M18F extends to 17 or 18 valves on a longer rail. Every 6HV100M code above 10 stations, including this one, is supplied with two supply and exhaust modules so the Dia 10 push-in feed stays even along the bank. If your valves are the smaller 6HV0500 type, the 6HV0500M rail with Dia 8 push-in is the matching family instead.
Applications
Sorting gate control
A 15 to 16 valve bank covers sorting gates and diverters in a distribution line, all fed from one Dia 10 push-in supply and one shared exhaust.
Multi-station assembly fixtures
Runs the clamping and eject valves of larger fixtures on a single 350 mm standard DIN rail instead of scattered individual valves.
Even feed to the last valve
With a supply and exhaust module at each end, valves at the far end of the 16-station bank see the same feed as those next to the inlet.
FAQ
How many valves does the 6HV100M16F take?
The 16F code covers 15 to 16 AirTAC 6HV100 valves on a 350 mm standard DIN rail. Supply and exhaust are Dia 10 push-in, valve ports are M5 or 1/8 in., and two supply and exhaust modules, one at each end, feed the bank since it exceeds 10 stations.
Is the 6HV100M16F a current AirTAC product?
No. AirTAC discontinued the 6HV series in January 2026 and has not named a replacement series. Request a quote with the order code 6HV100M16F and we will confirm whether this rail can still be supplied.