This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X110B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X110B
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X110B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X110B
A double acting compact cylinder with a through piston rod, the ACPD32X110B pushes and pulls with identical force because both strokes work on the rod-side area: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The 12 mm rod exits both covers, so the rear rod can carry a sensor flag or a second tool while resisting rotation and side load. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and a fixed TPU bumper sits at each end.
The hard-anodized aluminium body follows the short ISO 21287 class, cutting roughly 50% of the mounting length compared with an ISO 15552 profile cylinder, which makes it a fit for tight jigs and gantry heads. Note that this model is discontinued: the current-production direct is the ACED32X110, so confirm the ISO 21287 mounting dimensions before swapping. The optional -S magnet enables CMSE / DMSE switches; this unit, ordered without S, carries no magnet.
Airtac ACPD Double Rod Compact Cylinder ACPD32X110B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X110B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X110B |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X110B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X110B Is Used
Symmetric jig clamping
The through rod lets one cylinder clamp a machined aluminium bracket from both sides with an equal 345.6 N grip at 0.5 MPa, keeping the fixture balanced in a CNC cell.
Pusher with rear sensor flag
On a bottling line transfer conveyor, the 110 mm stroke kicks cartons sideways while the back-end rod carries a flag for a position sensor on a bracket.
Lift-and-lower press head
A small marking press uses the equal-force double rod to raise and lower a 17 kg head vertically at matched speed, with the TPU bumpers softening each end of travel.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X110B with the ACED32X110B
At 345.6 N per side at 0.5 MPa, the 32 mm bore suits clamping and transfer tasks in the 20-30 kg range; step down to the 25 mm bore (206.2 N) for lighter fixtures or up to the 40 mm bore (571.8 N) when the load grows. The 110 mm stroke sits well inside the 200 mm standard range for this bore. Because a plain double-rod cylinder drifts when air is lost, add a rod lock or pilot check if the load must stay put. FA/FB flange and LB foot mountings bolt to the ISO 21287 face, and the male rod thread (B code) accepts standard rod knuckles. Order the ACED32X110 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACED32X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X110B FAQ
It is a double-rod cylinder, so output is identical on both strokes: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal to about 70.5 kgf at the maximum 1.0 MPa rating. Both directions use the rod-side area of the 32 mm bore, so there is no push-versus-pull difference. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof limit.
The ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 110 mm stroke fits compact guards and slides. The fixed TPU bumper at each cover simply decelerates the piston at end of travel; it is not adjustable and never holds a load, so use a rod lock or pilot check where position must be retained. This model is discontinued and the ACED32X110 is the current direct - confirm ISO 21287 mounting dimensions before ordering.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X110B replacement — usually within 7-8 hours.