This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X150, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X150
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X150 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X150 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X150
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X150
A double acting compact cylinder with a rod leaving both covers, the ACPD32X150 delivers 345.6 N in each direction at 0.5 MPa (483.8 N at 0.7 MPa) because both strokes work on the rod-side area of the 32 mm bore. The 150 mm stroke sits well inside the 200 mm standard range for this bore, so it is a catalogue item, not a made-to-order build. Its hard-anodized aluminium body is an ISO 21287 short body, cutting roughly 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs and gantries.
The through-rod resists rotation and side load and gives a symmetric mount: the rear rod can carry a sensor flag or a counter fixture while the front rod does the work. A fixed TPU bumper sits at each end, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). Note this model is discontinued; the current-production direct is the ACED32X150, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD32X150 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X150 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X150 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X150 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X150
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X150 Is Used
Symmetric weld-jig clamping
The 345.6 N equal force in both directions lets one ACPD32X150 clamp and release a sheet-metal bracket with identical grip, while the rear rod drives a position-confirmation flag.
Reciprocating test rig pusher
A bottle-filling line test station cycles at 30-500 mm/s; the through-rod keeps the pusher square under side load and the TPU bumpers absorb the stroke ends over 150 mm of travel.
Dual-side gate interlock
On a packaging machine guard, rods on both covers actuate interlock pins from one cylinder, saving the space and cost of a second actuator in the 32 mm force class.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X150 with the ACED32X150
At 345.6 N per side at 0.5 MPa, this 32 mm bore suits clamping and transfer jobs in the 200-350 N band. If your load is lighter, the ACPD25X150 gives 206.2 N both ways; if you need more, step up to the ACPD40X150 at 571.8 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check for a held load. Mounting brackets (FA/FB flange, LB foot, CA/CB clevis and more) bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches - this code has no S, so no magnet is fitted. For new projects, order the ACED32X150 instead.
Replacement checklist
- ✓ Current-production ACE → ACED32X150
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X150 FAQ
No - it is a double-rod cylinder, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on each stroke, peaking at 70.5 kgf at 1.0 MPa. Both directions use the rod-side area of the 32 mm bore. The 150 mm stroke is within the 200 mm standard limit for this bore, ports are 1/8" (PT), and the rod thread is female M8x1.25.
Order the ACED32X150, the current-production ISO 21287 successor: swap the P for an E and you get the same 32 mm bore, 150 mm stroke and force class in a matching short body. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, since the ACP was built to the older DIN standard. FA/FB flange, LB foot and clevis brackets attach to the same face family.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X150
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X150 replacement — usually within 7-8 hours.