Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM
The AirTAC B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 75mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke75 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM
A riveted stainless round barrel with a hard-chrome plated 6 mm rod, the MAC16X75SCM is a double-acting mini cylinder with a variable air cushion at both ends. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa push rises to 140.7 N.
The CM round-end back cover gives a clean fixed mounting face without extra brackets, and the built-in magnet is standard, so CMSG / DMSG / EMSG switches clip straight on. The stainless barrel and plated rod shrug off mild corrosion and washdown far better than painted-steel minis, and the cushion needles let you tune arrival shock across the 30-800 mm/s speed range.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM Is Used
Bottle ejection on a filling line
Kicks empty PET bottles off a conveyor at the 75 mm mark; 100.5 N is ample for a light container and washdown-friendly stainless handles the wet zone.
Sample slide handling in lab automation
Slides trays between test stations; the built-in magnet feeds CMSG switches for repeatable end-position confirmation on every stroke.
Small parts press-fit in electronics assembly
Seats connectors into PCB jigs with around 60 N of usable force, dialled smooth at the ends by the variable air cushion.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM the Right Cylinder?
Bore 16 is the light-duty end of the MAC range: stepping up to 20 mm gives 157 N push at 0.5 MPa and bore 25 reaches 245.3 N, so choose up if 100.5 N feels tight. Like every plain double-acting cylinder it drifts when air drops - add a rod lock or pilot check valve if the load must stay put. The 75 mm stroke is well inside the 500 mm standard range for this bore; keep side load off the 6 mm rod on longer travels. Ports are M5x0.8 and the rod thread is M6x1.0.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa those rise to 140.7 N and 120.9 N. Theoretical maximum at 1.0 MPa is about 20.5 kgf for the 16 mm bore. Pressure range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and speed runs 30-800 mm/s.
The CM back cover presents a plain rounded fixed face, so you bolt it to a bracket without needing a pivot. The stainless barrel plus hard-chrome rod resists washdown and damp, and the standard-built magnet accepts CMSG, DMSG or EMSG switches with no special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC16X75SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.