Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X125SCA
AirTAC B01-MAC20X125SCA Special Purpose Cylinder Specifications
- Model: B01-MAC20X125SCA
- Type: ISO 6432 standard compact cylinder (double-acting)
- Bore size: 20mm (ISO designation: Ø20)
- Stroke: 125mm (±0.5mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable elastic cushion (both ends)
- Port size: M5x0.8 (G1/8 adaptor included)
- Piston speed: 50–800 mm/s (lubricated condition)
- Ambient temperature: -20℃ to 80℃
- Rod material: Hard chrome-plated steel (3-5μm thickness)
- Tube material: Anodized aluminum alloy
- Seal material: NBR + PU combination
- Mounting type: Basic front flange (NF1 installation)
- Position detection: Built-in magnet for sensor mounting
- Weight: 0.98kg (without accessories)
- Dimensions:
- Extended length: 207mm
- Retracted length: 82mm
- Width (flange to flange): 32mm
- Height (including rod): 53mm
High-precision industrial cylinder featuring low-friction design with self-lubricating bushings. The dual sealing system combines dust-resistant wipers and high-pressure seals, rated for 2 million cycles. Includes 4-meter IP67-rated magnetic switch compatibility grooves on two sides. Requires ISO VG32 hydraulic oil lubrication if used in high-cycle applications (>500 cycles/min).
- PCB board handling robots
- Pharmaceutical blister packaging machines
- Semiconductor wafer clamping mechanisms
- Automated test equipment positioners
- Cleanroom compatible automation systems
Installation note:
Maximum side load 15N. For vertical mounting, use locking nut (M12x1.25)
on piston rod end. Lubricate through air port using ISO VG32 oil mist
(0.3-0.5g/m³) during initial installation.
| Property | Property Value |
|---|---|
| sku | B01-MAC20X125SCA |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.