Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA
The AirTAC B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA
Reach 200 mm from a 20 mm bore with the MAC20X200SCA, a double-acting round mini whose variable air cushions at both ends can be tuned to kill end-of-stroke bang. At 0.5 MPa it delivers 157 N forward and 131.9 N back; at 0.7 MPa that is 219.8 N forward, and the theoretical ceiling sits at 32 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) air filtered to 40 um and run 30-800 mm/s.
Aluminium covers and a stainless block are rolled onto the stainless tube, a construction that resists corrosion in food-adjacent and outdoor plant without paint to chip.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA Is Used
Battery-car latch on AGV
Throwing a hold-down latch on an automated guided vehicle's battery tray - outdoor duty suits the stainless body, and the pivot cover matches the latch link.
Wood-glue spreader arm
Sweeping a glue roller across 200 mm of panel edge on a small cabinet line, with the cushion softening each reversal at speed.
Inspection camera shuttle
Sliding a vision camera into and out of a dial-machine station; EMSG switches trigger image capture at the exact in and out positions.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA the Right Cylinder?
Weigh a 16 mm bore (100.5 N push at 0.5 MPa) against a 25 mm bore (245.3 N) before committing; this 20 mm size splits the difference. With 200 mm of travel, brace the stroke: unsupported side load is the fastest way to score the barrel, so guide the load externally. Air loss means motion - the rod wanders once pressure fades, so specify a rod lock or pilot check valve where position must survive a power cut. The CA pivot back cover suits linkages, optional FA flange, LB foot or SDB pivot brackets cover fixed bases, and the built-in magnet already suits CMSG / DMSG / EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA FAQ
At 0.5 MPa: 157 N push, 131.9 N pull. At 0.7 MPa: 219.8 N push, 184.7 N pull. Theoretical maximum 32 kgf at 1.0 MPa. Operating band 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, with dual adjustable air cushions.
The 20 mm bore is supplied with 1/8" air ports on both covers and an M8x1.25 male thread on the 8 mm chrome-plated rod. PT is the default thread family with G and NPT orderable, and non-standard strokes are made to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.