Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU
The AirTAC B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 60mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke60 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU
The MAC20X60SU pairs a 20 mm bore with a 60 mm stroke in a round stainless-steel barrel that is rolled onto its aluminium covers, giving a riveted body that shrugs off washdown better than painted mini cylinders. Double acting with a variable air cushion at each end, it pushes 157 N and pulls 131.9 N at 0.5 MPa; the forward force climbs to 219.8 N at 0.7 MPa.
The U flat-end back cover lets you bolt the body flat against a machine plate with no pivot hardware, and the built-in magnet means CMSG, DMSG or EMSG switches clip on as standard, not as a special order.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU Is Used
Indexing table unlock
Extending and retracting locking pins on a rotary indexing table, where the 60 mm stroke clears a 40 mm pin and the cushion tames the snap at each end.
Reject gate push-off
Kicking misaligned bottles off a bottling line conveyor; about 94 N of working force moves light containers briskly within the 30-800 mm/s speed band.
Snap-lid press-down
Pressing snap-on lids onto small tubes in a packaging cell; the variable cushion stops the ram hammering when the lid seats.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU the Right Cylinder?
If 157 N at 0.5 MPa is more than the job needs, the 16 mm bore gives 100.5 N in the same family; step up to a 25 mm bore when you need 245.3 N. Remember the MAC20X60SU drifts when air is removed - add a rod lock or pilot check valve if the load must stay put. For pivoting motion, order the CA pivot or SDB bracket variant instead of this fixed U end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU FAQ
At 0.5 MPa it pushes 157 N and pulls 131.9 N; at 0.7 MPa the figures are 219.8 N push and 184.7 N pull, with a theoretical maximum of 32 kgf at 1.0 MPa. Ports are 1/8" PT, the rod is 8 mm with an M8x1.25 male thread, and 60 mm is a standard stroke.
The barrel is stainless steel and the rod is hard-chrome plated carbon steel, rolled into aluminium covers, so the body resists mild corrosion where painted minis would flake. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) from -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC20X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.