Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU
The AirTAC Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 150mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke150 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU
Need a full 150 mm of work travel from a compact bore? The MAC32X150SU delivers it with a flat U back cover that bolts straight onto LB foot or FA flange brackets without adapters. Its stainless barrel, aluminium covers and hard-chrome plated 12 mm rod handle damp plant air, while double acting supply with adjustable air cushions at both ends gives 402 N extend and 346 N retract at 0.5 MPa.
Plan on about 241 N of working force - 60 percent of the 0.5 MPa push rating - and this cylinder will raise roughly 20 kg vertically with a 2:1 margin. A piston magnet is standard, so DMSG or EMSG switches snap onto the barrel for position feedback without any special build.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU Is Used
Chute Gate Actuator
Opens a gravity chute gate between fill cycles; 150 mm of travel clears the flow path and cushions absorb gate slam.
Fixture Clamp Slide
Swings a clamp arm into place on welding jigs, using about 241 N of dependable force at 0.5 MPa.
Bin Eject Stroke
Pushes filled bins off a pick shelf in warehouse automation; the hard-chrome rod survives dusty, humid aisles.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU the Right Cylinder?
Benchmark at 0.5 MPa: the 25 mm bore gives 245 N and the 40 mm bore 628 N, which brackets this 32 mm model's 402 N nicely. With such a long stroke, keep side load off the rod and guide the load externally if it cannot travel in line. Air loss means drift on any standard MAC cylinder, so add a rod lock or pilot check valve where position must be held. PT 1/8 inch ports and M10x1.25 rod thread are fitted as standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU FAQ
Push 402 N and pull 346 N at 0.5 MPa; at 0.7 MPa push reaches 563 N; theoretical maximum 82 kgf at 1.0 MPa for a 32 mm bore. Speed range 30-800 mm/s, working pressure 0.15-1.0 MPa (22-145 psi).
No. The piston magnet is included as standard, so CMSG, DMSG or EMSG switches mount directly, and the U flat-end back cover accepts LB foot or FA flange brackets. Strokes beyond the 500 mm standard limit are made to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X150SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.