This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B01-MBL25X50CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA
The AirTAC B01-MAL Special Purpose Cylinder B01-MAL25X50CA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 50mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B01-MBL25X50CA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B01-MBL25X50CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA
The AirTAC B01-MAL25X50CA is a discontinued compact double-acting aluminum mini round cylinder. The leading "B01-" prefix marks this as an application-dedicated (customer-specified) variant of the base MAL25X50CA, meaning it is mechanically identical to the standard model with a 25mm bore and 50mm stroke. Delivering 245 N of push force at 0.5 MPa, it is now replaced by the direct replacement MBL25X50CA, which matches the exact bore, stroke, output force, G1/8 port, and CA mounting.
This legacy cylinder features a CA pivot clevis back cover designed to swing on a pin for arcing loads, paired with a carbon-steel rod hardened with 20 um chrome plating and a grease-retaining two-way seal. The original MAL body utilized threaded front and back covers, whereas the modern MBL replacement upgrades to a riveted rolling-packed body. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA Technical Specifications
| Model | Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B01-MBL25X50CA |
| Bore size | Ø25 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B01-MBL25X50CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The B01-MBL25X50CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×50 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA Is Used
Textile Loom Yarn Guide
Actuates a yarn guide arm through a 50mm arc, relying on the CA pivot clevis to absorb lateral movement while providing 245 N of push force at 0.5 MPa.
Bottling Line Diverter
Pushes lightweight PET bottles onto a parallel packaging track, utilizing the compact 25mm bore and fixed rubber bumper to soften the 50mm extension impact.
PCB Shuttle Pusher
Advances circuit board trays within an electronics assembly machine, where the self-lubricating front-cover bearing guide ensures smooth operation in tight spaces.
Replacing the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA with B01-MBL25X50CA
To replace this discontinued cylinder, order the MBL25X50CA. Confirm your 50mm stroke, PT thread, G1/8 port, and CA pivot back cover to ensure a perfect direct fit. If you need to adjust the bore, stepping down to the 20mm bore yields 157 N of push at 0.5 MPa, while stepping up to the 32mm bore provides 402 N. If your application requires adjustable air cushioning at the end of stroke, look at the MBLC variant on the current line, as the MAL only offers a fixed rubber bumper. Remember that a plain cylinder does not hold its load when air pressure is lost; use an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the B01-MBL25X50CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B01-MBL25X50CA instead of this discontinued model.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA FAQ
Yes, the B01-MAL25X50CA is discontinued. The direct replacement is the MBL25X50CA, which offers the same 25mm bore, 50mm stroke, G1/8 port, and CA pivot mounting. The B01- prefix simply denotes an application-dedicated variant, so the MBL25X50CA functions as a direct mechanical replacement.
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force is 343 N, with a maximum theoretical force of 50 kgf at 1.0 MPa. Because this SKU lacks an -S magnet, it cannot accept a position sensor; if sensing is required, order the MBL25X50CAS, which uses current CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B01-MBL25X50CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B01-MAL Special Purpose Cylinder B01-MAL25X50CA → B01-MBL25X50CA)
Tell us the quantity and destination — we quote the direct B01-MBL25X50CA replacement with price, stock and lead time, usually within 7-8 hours.