This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B01-MBL32X100CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA
The AirTAC B01-MAL Special Purpose Cylinder B01-MAL32X100CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B01-MBL32X100CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B01-MBL32X100CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA
The AirTAC B01-MAL32X100CA is a discontinued double-acting aluminum mini round cylinder. The leading "B01-" prefix designates this as an application-dedicated (customer-specified) variant of the base MAL32X100CA, meaning it is mechanically identical to the standard model but grouped for a specific customer build. Delivering 402 N of push force and 346 N of pull force at 0.5 MPa, it is engineered for compact spaces. AirTAC replaced the MAL line with the MBL series, making the MBL32X100CA the direct replacement. It shares the same 32 mm bore, 100 mm stroke, G1/8 port, and CA pivot mounting, ensuring a seamless retrofit.
This legacy model features a Ø12 mm carbon-steel rod with 20 um hard-chrome plating and a heterogeneous two-way seal that retains grease for long service life. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body. This specific SKU lacks a built-in magnet (-S), meaning it cannot accept position sensors like the older CS1-M or DS1-M switches. End-of-stroke deceleration is handled by a fixed rubber bumper, not an adjustable air cushion.
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA Technical Specifications
| Model | Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B01-MBL32X100CA |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B01-MBL32X100CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B01-MBL32X100CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA Is Used
Textile Loom Yarn Guide
Actuates a yarn guide arm on a weaving machine, using the 402 N push force at 0.5 MPa to shift the thread pattern while the CA pivot absorbs the lateral arc of the mechanism.
Bottling Line Diverter
Pushes glass bottles onto a secondary packaging lane, where the 100 mm stroke provides just enough travel to clear the main conveyor belt without taking up excessive floor space.
PCB Stacking Pusher
Separates and pushes printed circuit boards into a testing fixture, relying on the self-lubricating front-cover bearing guide to maintain smooth operation in a dry, dust-free electronics assembly cell.
Replacing the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA with B01-MBL32X100CA
To replace this discontinued cylinder, order the MBL32X100CA. Confirm your PT port thread, the CA pivot back cover (which swings on a pin to absorb arcing loads), and note that because this SKU has no -S magnet, you cannot mount a sensor. If you need position detection on the new unit, add an -S to the MBL order, but be aware the MBL uses the newer CMSG, DMSG, or EMSG switch families instead of the legacy CS1-M/DS1-M. The fixed rubber bumper is suitable for standard loads, but if your application requires adjustable end-cushioning, you must step up to the current-line MBLC32X100 variant.
For sizing flexibility, you can step down to the 25 mm bore (MBL25X100CA) which yields 245 N push at 0.5 MPa, or step up to the 40 mm bore (MBL40X100CA) which provides 628 N push at 0.5 MPa and upgrades the port to G1/4. Because this is a 100 mm stroke, side-load stress on the 12 mm rod is moderate, but always ensure the CA clevis is aligned with the load's arc. Note that a plain cylinder does not hold its position if air pressure drops; use an external rod lock for fail-safe load holding.
Upgrade checklist
- ✓ Order the B01-MBL32X100CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B01-MBL32X100CA instead of this discontinued model.
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA FAQ
Yes, the B01-MAL32X100CA is discontinued. The direct replacement is the MBL32X100CA. The "B01-" prefix simply marks it as an application-dedicated variant of the standard MAL32X100CA, so the MBL version matches your 32 mm bore, 100 mm stroke, G1/8 port, and CA pivot mounting exactly. The main physical change is that the MBL uses a riveted rolling-packed body instead of the older threaded covers.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N, and the maximum theoretical force is 82 kgf at 1.0 MPa. Because this specific SKU does not have the -S magnet, it cannot accept position sensors. If you order the MBL replacement with an -S, you must use the newer CMSG, DMSG, or EMSG switches rather than the old CS1-M or DS1-M.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B01-MBL32X100CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B01-MAL Special Purpose Cylinder B01-MAL32X100CA → B01-MBL32X100CA)
Tell us the quantity and destination — we quote the direct B01-MBL32X100CA replacement with price, stock and lead time, usually within 7-8 hours.