This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B01-MBL32X230SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B01-MBL32X230SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA
The AirTAC Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the B01-MBL32X230SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B01-MBL32X230SCA
About the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA
The AirTAC B01-MAL32X230SCA is a discontinued double-acting aluminum mini round cylinder. The B01- prefix designates an application-dedicated (customer-specified) variant, mechanically identical to the standard MAL32X230SCA. Delivering 402 N of push force at 0.5 MPa over a 230 mm stroke, it is replaced drop-in by the MBL32X230SCA. You gain a riveted rolling-packed body on the MBL, upgrading the older threaded front and back covers found on this legacy MAL.
This SKU includes a built-in magnet (-S) for position detection and a CA pivot (clevis) back cover designed to swing on a pin for arcing loads. The original MAL -S magnet interfaces with legacy CS1-M / DS1-M switches; the MBL32X230SCA replacement transitions to current CMSG / DMSG / EMSG sensors. The carbon-steel rod features 20 um hard-chrome plating, guided by a self-lubricating front-cover bearing.
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA Technical Specifications
| Model | Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B01-MBL32X230SCA |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B01-MBL32X230SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B01-MBL32X230SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×230 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA Is Used
Pouch Packaging Diverter
Swings via the CA pivot to deflect sealed pouches on a packaging line, utilizing the 402 N push force at 0.5 MPa to clear jams without crushing the product.
Textile Loom Tensioner
Uses the 230 mm stroke to position a yarn tensioning bar, where the self-lubricating bearing guide ensures smooth travel in high-vibration weaving environments.
Warehouse Carton Stopper
Extends across a gravity roller conveyor to halt corrugated cartons, absorbing the impact via the fixed rubber bumper while the -S magnet confirms the stop is deployed.
Replacing the Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA with B01-MBL32X230SCA
To replace this discontinued cylinder, order the MBL32X230SCA. It matches the 32 mm bore, 230 mm stroke, G1/8 port, PT thread, CA pivot back cover, and magnet. Because this is a 230 mm stroke, the 12 mm rod has low side-load tolerance; rely on the CA clevis to absorb alignment variance or add an external guide to prevent rod bending. If you need adjustable end-cushioning instead of the fixed rubber bumper, step up to the MBLC equivalent.
For sizing flexibility, step down to a 25 mm bore for lighter loads (206 N pull at 0.5 MPa) or up to a 40 mm bore for heavier tasks (528 N pull at 0.5 MPa). The fixed rubber bumper softens end-of-stroke impact but does not lock the rod; a plain MAL/MBL drifts when air is lost, so add an external rod lock for vertical or held loads.
Upgrade checklist
- ✓ Order the B01-MBL32X230SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B01-MBL32X230SCA instead of this discontinued model.
Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA FAQ
Yes, the B01-MAL32X230SCA is discontinued. The exact drop-in replacement is the MBL32X230SCA, matching the 32 mm bore, 230 mm stroke, G1/8 port, CA pivot, and magnet. The B01- prefix simply marks it as an application-dedicated variant of the base MAL model, so the MBL fits identically.
At 0.5 MPa it provides 402 N push and 346 N pull force; at 0.7 MPa push is 563 N, with a theoretical max of 82 kgf at 1.0 MPa. The -S magnet on the MAL works with CS1-M / DS1-M switches, but the MBL32X230SCA replacement requires the newer CMSG / DMSG / EMSG sensor family.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The B01-MBL32X230SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B01-MAL Special Purpose Cylinder B01-MAL32X230SCA → B01-MBL32X230SCA)
Tell us the quantity and destination — we quote the drop-in B01-MBL32X230SCA replacement with price, stock and lead time, usually within 7-8 hours.