This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B05-MBL32X350, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350
The AirTAC B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B05-MBL32X350, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B05-MBL32X350
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350
The AirTAC B05-MAL32X350 is a discontinued double-acting aluminum mini round cylinder. The B05- prefix marks it as a robot and manipulator (pick-and-place) dedicated variant, mechanically identical to the standard MAL32X350. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, utilizing a 12 mm carbon-steel rod with 20 um hard-chrome plating guided by a self-lubricating front-cover bearing.
AirTAC replaced this legacy unit with the MBL32X350, a direct alternative retaining the exact 32 mm bore, 350 mm stroke, G1/8 port, and 82 kgf maximum theoretical force. The original MAL features threaded front and back covers, whereas the MBL upgrade utilizes a riveted rolling-packed body. Furthermore, this specific SKU lacks a -S magnet, meaning it cannot accept a position sensor out of the box.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 Technical Specifications
| Model | Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B05-MBL32X350 |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B05-MBL32X350 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B05-MBL32X350 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×350 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 Is Used
Pick-and-Place Robot Arms
Drives the vertical Z-axis extension on Cartesian manipulators, providing 402 N of push at 0.5 MPa to lift and position lightweight electronic components across a 350 mm travel distance.
PCB Board Sorting
Actuates a pushing blade on a SMT line to divert populated printed circuit boards into buffering lanes, utilizing the 350 mm stroke to clear the main conveyor belt width.
Small Parts Ejection
Ejects molded plastic caps from an injection press cavity, relying on the self-lubricating front-cover bearing guide to maintain rod alignment over 350 mm of rapid cycling.
Replacing the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 with B05-MBL32X350
To replace the B05-MAL32X350, order the MBL32X350. Confirm the 32 mm bore, 350 mm stroke, G1/8 PT port, and double-acting single-rod configuration match your manipulator's mounting scheme. If you need to adjust the force, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa alongside a larger G1/4 port.
Because this model lacks the -S magnet, it cannot support position sensing; if your pick-and-place cycle requires end-of-stroke confirmation, you must specify an MBL32X350S and migrate to the current CMSG / DMSG / EMSG sensor family. At 350 mm of stroke, the 12 mm rod is highly susceptible to bending under lateral deflection; use an external linear guide or a pivot mounting bracket to absorb side loads. The fixed rubber bumper softens end-of-stroke impacts but does not lock the rod—if air pressure drops, the manipulator arm will drift. For adjustable air cushioning, specify the MBLC32X350 on the current line.
Upgrade checklist
- ✓ Order the B05-MBL32X350 (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B05-MBL32X350 instead of this discontinued model.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 FAQ
Yes, the B05-MAL32X350 is discontinued. The direct replacement is the MBL32X350, which shares the identical 32 mm bore, 350 mm stroke, G1/8 port, and mounting dimensions. The B05- prefix simply designated it for robot and manipulator pick-and-place use; the MBL32X350 fulfills this mechanically without any physical spec changes.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU does not have a -S magnet, it cannot accept CS1-M or DS1-M position sensors; if sensing is required, order the MBL32X350S and use CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B05-MBL32X350 replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X350 → B05-MBL32X350)
Tell us the quantity and destination — we quote the direct B05-MBL32X350 replacement with price, stock and lead time, usually within 7-8 hours.