This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B06-MBL32X200SCA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA
The AirTAC B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B06-MBL32X200SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-MBL32X200SCA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA
The AirTAC B06-MAL32X200SCA is a discontinued double-acting aluminum mini round cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the base MAL32X200SCA, meaning it is mechanically identical to the standard model. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC has ended production of this series, and the direct replacement is the MBL32X200SCA, which matches the 32 mm bore, 200 mm stroke, G1/8 port, and CA pivot mounting.
This unit features a built-in -S magnet for position sensing. On the legacy MAL body, this magnet pairs with older CS1-M or DS1-M reed switches, whereas the modern MBL replacement utilizes the current CMSG, DMSG, or EMSG sensor families. The original MAL design relies on threaded front and back covers fastened to the barrel, while the updated MBL uses a riveted rolling-packed body for structural rigidity. Both generations use a fixed rubber bumper at the stroke ends rather than an adjustable air cushion, and neither can hold a load if air pressure is lost.
Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA Technical Specifications
| Model | Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B06-MBL32X200SCA |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B06-MBL32X200SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-MBL32X200SCA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA Is Used
Prismatic Cell Stacking
Provides 402 N of push at 0.5 MPa to press and align prismatic lithium-ion cells tightly against each other within module housings prior to banding.
Tab Welding Clamp
Extends 200 mm to drive a copper clamp onto battery busbars, holding the components rigidly for automated laser welding without imparting excessive side-load on the rod.
Pack Pallet Diversion
Uses the CA pivot mount to articulate a pusher arm on a conveyor line, sweeping finished battery packs into secondary packaging lanes.
Replacing the Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA with B06-MBL32X200SCA
To replace the B06-MAL32X200SCA, order the MBL32X200SCA. This modern direct maintains the identical 32 mm bore, 200 mm stroke, PT port threads, and CA pivot back cover. Because your SKU includes the -S magnet, you must update your sensing components: the older CS1-M and DS1-M switches used on the MAL will not fit the new body, so migrate to the CMSG, DMSG, or EMSG sensor series designed for the MBL. If your battery-stacking application requires adjustable end-cushioning to soften impacts, you must step up to the MBLC variant, as the MAL only offers a fixed rubber bumper.
When sizing this actuator for battery cell handling, verify if 402 N of push at 0.5 MPa is sufficient. If you need less force to avoid deforming delicate battery foils, step down to the 25 mm bore, which provides 245 N of push. If you need more power to compress module padding, step up to the 40 mm bore, which delivers 628 N. At 200 mm of stroke, the 12 mm rod is susceptible to bending under lateral stress; use the CA clevis to allow the cylinder to swing on a pin and accommodate arcing loads, or add an external guide rail. Note that a plain double-acting cylinder drifts when air is removed, so add a pilot-operated check valve if you need to prevent a vertical payload from dropping.
Upgrade checklist
- ✓ Order the B06-MBL32X200SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B06-MBL32X200SCA instead of this discontinued model.
Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA FAQ
Yes, the B06-MAL32X200SCA is discontinued. The direct replacement is the MBL32X200SCA. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base MAL32X200SCA, and the MBL replacement shares the exact same 32 mm bore, 200 mm stroke, G1/8 port, CA pivot back cover, and -S magnet.
At 0.5 MPa it provides 402 N push and 346 N pull; at 0.7 MPa it provides 563 N push, with a maximum theoretical force of 82 kgf at 1.0 MPa. The -S magnet on the legacy MAL works with CS1-M and DS1-M switches, but the MBL replacement requires the newer CMSG, DMSG, or EMSG sensor families.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B06-MBL32X200SCA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B06-MAL Battery-Specific Pneumatic Cylinder B06-MAL32X200SCA → B06-MBL32X200SCA)
Tell us the quantity and destination — we quote the direct B06-MBL32X200SCA replacement with price, stock and lead time, usually within 7-8 hours.