Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 is a genuine double-acting standard air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700
The B06-SC40X700 is an AirTAC double-acting tie-rod pneumatic cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SC40X700. It delivers 628N of push force at 0.5 MPa and features a 16mm piston rod with a 21mm adjustable cushion to absorb end-of-stroke impacts.
With a 700mm stroke, this unit provides an extended length of approximately 842mm (body length A 142mm plus stroke). It is tailored for the extended reaches required in cell, module, and pack assembly lines without exceeding the 1200mm maximum standard stroke limit for this bore size.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 Is Used
Cell Stacking Transfer
Drives the extended horizontal push and pull motions required to index battery cells into stacking fixtures with precise spacing.
Module Conveyor Routing
Actuates diverter arms over long 700mm reaches to route battery modules between assembly and testing stations.
Pack Handling Pusher
Pushes heavy battery packs onto outbound packaging conveyors, utilizing its 879N push force at 0.7 MPa to move loads reliably.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 the Right Cylinder?
This 40mm bore offers 628N push and 528N pull at 0.5 MPa; step down to a 32mm bore (402N push) for lighter tabbing tasks, or up to a 50mm bore (982N push) if your pack handling requires more thrust. For direct replacements, match the 40mm bore, 700mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly.
Because the 700mm stroke creates a long unsupported rod, avoid applying heavy side loads directly to the piston tip. Use an external guide rail or a guided cylinder to prevent rod-bearing bending and premature seal wear during horizontal battery tray transfer operations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X700, offering the same 40mm bore, 700mm stroke, 628N push force at 0.5 MPa, and PT1/4 port.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end. A mechanical lock or external pilot-operated check valve is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.