Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 is a genuine double-acting standard air cylinder with a Ø40mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75
The AirTAC B06-SC40X75 is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X75, meaning it is mechanically identical to the base model. It features a 40mm bore and a 75mm stroke, generating 628N of push force at 0.5 MPa and up to 1130N at 0.9 MPa.
This unit is built with a 16mm piston rod, a PT1/4 port, and adjustable cushions measuring 21mm. With a body length A of 142mm, the total extended length is 217mm. The standard TPU seals support an operating temperature range of -20 to +70 C, making it highly reliable for demanding cell and module assembly lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 Is Used
Cell Stacking
Provides precise 75mm actuation for aligning and stacking battery cells in automated production modules.
Tab Welding Press
Delivers 879N of push force at 0.7 MPa to hold battery tabs firmly in place during ultrasonic welding.
Module Handling
Moves battery modules along assembly conveyors with reliable double-acting air control and adjustable cushions.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 the Right Cylinder?
Select this 40mm bore when your application requires moderate force, such as 879N push at 0.7 MPa. If you need less force, the 32mm bore offers 563N at 0.7 MPa; for heavier loads, the 50mm bore provides 1374N at 0.7 MPa. Because the 75mm stroke is relatively short, side-load stress on the rod bearing is minimal compared to long-stroke units.
When ordering a replacement for the B06-SC40X75, match these five critical attributes: the 40mm bore, the 75mm stroke, the PT1/4 port thread, the basic mounting style, and the absence of a built-in magnet. Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 models, so it is not a direct ISO replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC40X75 cylinder. It is mechanically identical to the base SC40X75 model, offering the same 40mm bore, 75mm stroke, and force specifications.
At 0.5 MPa, the SC40X75 generates 628N of push force and 528N of pull force. At its maximum operating pressure of 0.9 MPa, it delivers 1130N of push force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.