The AirTAC BFC F.R.L Pneumatic Air Filter BFC30001 is a genuine A/B-line two-unit F.R.L. set with PT3/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BFC sub-family combines a B-line filter regulator and a lubricator in one two-unit set, giving you filtering, pressure regulation and oil-mist lubrication from a single order. This 3000-size set is threaded PT3/8. The filter stage uses the standard 40 um element with the default differential-pressure and manual drain, and the regulator stage carries an MPa-scale gauge with a push-to-lock self-locking knob that holds the setting between 0.15 and 0.9 MPa (20-130 psi). The lubricator's transparent sight dome makes it easy to watch and adjust the oil drip rate. Both bowls are PC, the B-line adds a high-strength plastic protective cover over the bowl, maximum inlet pressure is 1.0 MPa (145 psi), and the temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC compact A/B-line part, offered in 1500 (1/8 in), 2000 (1/4 in), 3000 (3/8 in) and 4000 (1/2 in) port sizes. Rated flow is not published as a single figure for this family, so ask us to confirm sizing and datasheet figures on request.
| Model | Airtac BFC F.R.L Pneumatic Air Filter BFC30001 |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
The 3000 frame suits 3/8 in PT circuits with heavier air demand than the 2000 frame; the B-line body also brings the bowl protective cover, while the A-line covers compact 1/8 in and 1/4 in builds. Drains are differential-pressure plus manual by default, with M for manual-only and A for automatic draining. Filtration is 40 um standard or 5 um with the W option, and the regulator is the standard type or the L low-pressure type limited to 0.4 MPa. Gauge scales can be MPa, psi, bar or kgf/cm2 & psi, or the gauge can be deleted with N. PT is the standard thread, with G (BSPP) and NPT available to order in the same frame. Flow is not a single rated figure, so ask us to confirm the set against your demand before ordering.
Prepares air for rack-and-pinion pneumatic actuators on process valves in a plant skid, with the regulator setting stroking pressure and the lubricator misting the gear train and seals.
Conditions the compressed air feeding the air-jet and mechanism cylinders on weaving looms, where the 40 um element protects jets and the oil mist keeps moving parts running.
Feeds regulated, lubricated air to the impact guns and air ratchets on a commercial vehicle service bay drop line, with the MPa gauge letting the shop set a fixed tool pressure.
AirTAC does not publish rated flow for the compact BFC two-unit set as a single figure, and we will not estimate one. Give us your line pressure and air demand and we will confirm the correct size and the datasheet flow figures on request.
Yes. PT is the standard thread on this listing, and G (BSPP) and NPT versions can be ordered in the same 3000 frame. The trailing 1 on this model also tells you the gauge is the MPa scale; psi, bar and kgf/cm2 & psi scales are available to order.