The AirTAC BFC F.R.L Pneumatic Air Filter BFC4000A2T is a genuine A/B-line two-unit F.R.L. set with PT1/2" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BFC4000A2T is a two-unit AirTAC compact set for 1/2 inch NPT ports: a B-line filter-regulator combined with a lubricator, delivering filtered, regulated and lubricated compressed air from one assembly. The filter section uses the standard 40 um element with an automatic drain in its PC bowl, the regulator is the L low-pressure type with output limited to 0.4 MPa and a self-locking push-to-lock knob, and the set includes a gauge on a psi scale. The lubricator's transparent sight dome lets you observe the oil drip rate as it works.
This is a genuine AirTAC part from the larger B-line body of the compact A/B series, for compressed air only, rated to 1.0 MPa (145 psi) maximum inlet/working pressure and -5 to 70 C (non-freezing). The same two-unit concept is offered in 1500 (1/8 inch), 2000 (1/4 inch) and 3000 (3/8 inch) sizes. Flow is not published as a single rating, so we confirm flow and datasheet figures on request.
| Model | Airtac BFC F.R.L Pneumatic Air Filter BFC4000A2T |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/2" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Select the B-line BFC4000 when 1/2 inch ports and the larger body match your demand; the smaller A-line AFC body is the alternative. Drain: this code has A for automatic draining, versus the default differential-pressure plus manual drain. Filter grade: 40 um standard here, or order with W for the 5 um element. Regulator type: this is the L low-pressure version capped at 0.4 MPa; the standard type regulates across 0.15-0.9 MPa (20-130 psi). Gauge scales are coded 1 MPa, 2 psi (this model), 3 bar, or 4 kgf/cm2 & psi, with N omitting the gauge. Thread: the trailing T gives NPT on 1/2 inch ports; PT is the standard and G is available to order. Flow is not a single rating, so ask us to confirm sizing before ordering.
Keeps the cylinders that raise, divert and stop product on a packaging conveyor supplied with filtered, regulated, lubricated air, with automatic drain handling condensate.
Serves air tools on a commercial vehicle assembly or upfitting line, protecting them with the 40 um element while the psi gauge and low-pressure setting match tool specs.
Feeds the small air cylinders that tension, lift and position fabric frames, with the sight dome letting operators verify lubrication during long production runs.
Yes. Flow is not published as a single rated figure for this series, so we treat it as a confirm-on-request item rather than quoting a number. Share your supply pressure, set pressure and air demand, and we will confirm the flow and the full datasheet for the BFC4000A2T.
The trailing T specifies NPT threads on the 1/2 inch ports, a common fit for North American piping. PT is the standard thread for this family, and G (BSPP) is available to order by using the G suffix; the 4-digit size sets the port size.