Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 210mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke210 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA
Double acting with a variable air cushion at both ends, the MAC32X210SCA pairs a 32 mm bore with a 210 mm stroke in a riveted round barrel. At 0.5 MPa it pushes 402 N and pulls 346 N, so it slots into light assembly and small-lift work that bigger bores would overshoot. Plan on roughly 241 N of dependable working force, about 60 percent of the push rating, and it will lift about 20 kg vertically once a 2:1 margin is applied to its 41 kgf thrust.
The stainless-steel tube shrugs off washdown and damp air that rust painted minis, while the hard-chrome plated 12 mm rod keeps seal wear low over long strokes. The CA pivot back cover swings on trunnion fixtures without added brackets, and a built-in magnet, standard here, lets CMSG, DMSG or EMSG switches clip straight over the barrel.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA Is Used
Bottling line stop gate
A CA pivot lets the gate swing down across a bottle lane; 402 N at 0.5 MPa stops the flow and the cushion damps the slam.
Pouch eject
Push filled pouches off a forming station with about 241 N of sizing force, well inside the 402 N rating of the 32 mm bore.
Camera raise
Lift a 20 kg inspection camera over a pass line, with the 210 mm travel covering the full viewing window.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA the Right Cylinder?
A 25 mm bore gives 245 N at 0.5 MPa if the load is lighter; a 40 mm bore gives 628 N if heavier. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s. The rod drifts when air is cut, so add a rod lock or pilot check valve wherever the 210 mm stroke must park under load. FA flange, LB foot and SDB pivot brackets match the CA cover for fixed or pivoted frames.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa those figures rise to 563 N push and 484 N pull. Theoretical maximum is 82 kgf at 1.0 MPa. The 12 mm rod carries an M10x1.25 male thread and the ports are 1/8 inch, standard on 32 mm bores.
A piston magnet ships as standard, so CMSG, DMSG and EMSG reed or electronic switches mount directly over the stainless barrel for end-of-stroke or mid-stroke signalling - no special piston order needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X210SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.