This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X125-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 95 to 125 mm. This model is discontinued — the direct replacement is the MBLJ25X125-30.
- BoreØ25 mm
- Stroke125 mm
- Adjust window95–125 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X125-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30
The AirTAC MALJ25X125-30 is a discontinued double-acting double-rod mini cylinder with a rear adjustable stroke stop. The 30mm adjuster creates a usable 95-125mm end-position window, letting you fine-tune reach without adding external stops.
The direct replacement is the MBLJ25X125-30, matching the 25mm bore, 125mm stroke, G1/8 port, and 30mm adjust code. Note that this original MALJ uses threaded covers and a fixed rubber bumper, while the MBLJ upgrades to a riveted rolling-packed body. This specific SKU lacks a magnet (-S) and cannot accept a position sensor.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X125-30 |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Adjustable window | 95 – 125 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X125-30 carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X125-30 matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×125 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 95–125 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 Is Used
Bottle Cap Torque Tool
Adjust the end position to control the downward reach of a capping head, ensuring consistent torque on plastic beverage caps without over-compressing the container.
Fiberboard Notching Jig
Fine-tune the 125mm return stroke to position a notching blade precisely on a woodworking line, accommodating varying 10-12mm fiberboard thicknesses without retooling.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 with MBLJ25X125-30
Replace this MALJ25X125-30 directly with the MBLJ25X125-30, confirming the 25mm bore, 125mm stroke, 30mm adjust code, PT thread, and FA/LB mounting (no back cover or SDB). The rear adjuster sets travel limits but is a stop, not a lock; it will not hold a load without live air. At 125mm stroke, prevent rod bending by ensuring rigid guide alignment.
Upgrade checklist
- ✓ Order the MBLJ25X125-30 (same bore/stroke/adjust)
- ✓ Same 95–125 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X125-30 instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 FAQ
Yes, the MALJ25X125-30 is discontinued. The direct replacement is the MBLJ25X125-30, which matches the 25mm bore, 125mm stroke, 30mm adjust code, G1/8 port, and force. The MBLJ upgrades the threaded covers to a riveted rolling-packed body.
The 30mm adjuster allows a usable stroke window of 95-125mm. It uses a fixed rubber bumper, not an adjustable cushion, and the adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X125-30 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X125-30 → MBLJ25X125-30)
Tell us the quantity and destination — we quote the direct MBLJ25X125-30 replacement with price, stock and lead time, usually within 7-8 hours.