This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X150-75, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 75 to 150 mm. This model is discontinued — the direct replacement is the MBLJ25X150-75.
- BoreØ25 mm
- Stroke150 mm
- Adjust window75–150 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X150-75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75
The AirTAC MALJ25X150-75 is a discontinued double-acting, double-rod mini cylinder with a 75 mm rear travel stopper. It uses a G1/8 port, an M10x1.25 rod thread, and a fixed rubber bumper for end-of-stroke impact absorption. The direct replacement is the MBLJ25X150-75, which matches the bore, stroke, adjust code, force, and port.
Two key upgrade facts apply to the MBLJ successor: the older MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. Also, this specific MALJ SKU lacks the -S magnet option, meaning it cannot accept a position sensor. The rear adjuster is a travel stop that sets the end position; it does not hold a load without live air pressure.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X150-75 |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Adjustable window | 75 – 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X150-75 carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X150-75 matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×150 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 75–150 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 Is Used
Carton Flap Folder Stroke Trim
Adjust the rear stopper on a packaging line to synchronize flap folding depth for varying carton heights, avoiding the need to physically swap the cylinder.
Pneumatic Press Pin Set
Set the precise insertion depth for press-fitting connector pins, using the fixed rubber bumper to soften the end impact while tuning the exact seating height.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 with MBLJ25X150-75
To replace the MALJ25X150-75, order the direct replacement MBLJ25X150-75. Confirm the 25 mm bore, 150 mm stroke, 75 mm adjust code, G1/8 port, PT thread, and FA or LB mounting (the series uses no back cover or SDB). Since this SKU lacks an -S magnet, it cannot hold a sensor. The adjuster is a stop, not a lock. At 150 mm stroke, minimize side-load to prevent rod bending.
Upgrade checklist
- ✓ Order the MBLJ25X150-75 (same bore/stroke/adjust)
- ✓ Same 75–150 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X150-75 instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 FAQ
Yes, the MALJ25X150-75 is discontinued. The direct replacement is the MBLJ25X150-75, which matches the 25 mm bore, 150 mm stroke, 75 mm adjust code, G1/8 port, and FA/LB mounting. The MBLJ upgrades the body to a riveted rolling-packed design from the original threaded covers.
The 75 mm adjust code lets you trim the rear end position, creating a usable stroke window from 75 mm to 150 mm. This SKU has no -S magnet, so it cannot take a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X150-75 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X150-75 → MBLJ25X150-75)
Tell us the quantity and destination — we quote the direct MBLJ25X150-75 replacement with price, stock and lead time, usually within 7-8 hours.