This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X60-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 50 to 60 mm. This model is discontinued — the direct replacement is the MBLJ25X60-10.
- BoreØ25 mm
- Stroke60 mm
- Adjust window50–60 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X60-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10
The AirTAC MALJ25X60-10 is a discontinued double-acting double-rod mini cylinder with a 25 mm bore and 60 mm stroke. A rear screw lets you trim up to 10 mm, giving a usable end-position window of 50-60 mm. The direct replacement is the MBLJ25X60-10, matching the bore, stroke, adjuster, G1/8 port, and mounting.
This SKU lacks the -S magnet, so it cannot accept a position sensor. The original MALJ uses threaded covers and the adjuster is a travel stop, not a lock. The MBLJ upgrade features a riveted rolling-packed body. Both use a fixed rubber bumper, as the adjustable stroke must not be confused with an air cushion.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X60-10 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Adjustable window | 50 – 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X60-10 carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X60-10 matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×60 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 50–60 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 Is Used
PCB Drill Depth Stop
Dial in the 50-60 mm reach on a PCB drilling fixture.
Wire Straightener Guide
Feeding copper wire into a bending head. The 25 mm bore provides steady 206 N pull on the rod, and the adjustable window lets you shift the retraction end-point to clear different wire diameters.
Small-Part Ejector
Ejecting stamped terminals from a die set. The fixed rubber bumper softens the end impact at 60 mm stroke, preventing part deformation while you trim up to 10 mm to match the ejector clearance.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 with MBLJ25X60-10
To replace the MALJ25X60-10, order the exact direct replacement MBLJ25X60-10. Confirm the 25 mm bore, 60 mm stroke, 10 mm adjust code, PT G1/8 port, and FA/LB mounting (no back cover or SDB allowed). Because this SKU has no -S magnet, it cannot take a sensor; if you need sensing, the MBLJ -S uses CMSG/DMSG/EMSG switches instead of the old CS1-M/DS1-M. The adjuster sets the end position but does not hold load without live air.
At 60 mm stroke, rod side-load is minimal, but keep lateral forces off the rod to prevent seal wear.
Upgrade checklist
- ✓ Order the MBLJ25X60-10 (same bore/stroke/adjust)
- ✓ Same 50–60 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X60-10 instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 FAQ
Yes, the MALJ25X60-10 is discontinued. The direct replacement is the MBLJ25X60-10, which matches the 25 mm bore, 60 mm stroke, 10 mm adjuster, G1/8 port, and mounting. The MBLJ upgrades the threaded covers to a riveted rolling-packed body. If you need a sensor, note this no-S SKU cannot take one; you must order the MBLJ25X60-10S for CMSG/DMSG/EMSG switches.
The -10 adjust code lets you trim up to 10 mm at the rear, creating a usable stroke window of 50-60 mm. The adjuster is a travel stop, not a lock, and cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X60-10 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-10 → MBLJ25X60-10)
Tell us the quantity and destination — we quote the direct MBLJ25X60-10 replacement with price, stock and lead time, usually within 7-8 hours.