This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X60-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 10 to 60 mm. This model is discontinued — the direct replacement is the MBLJ25X60-50S.
- BoreØ25 mm
- Stroke60 mm
- Adjust window10–60 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X60-50S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S
The AirTAC MALJ25X60-50S is a discontinued double-acting double-rod mini cylinder with a rear adjustable stroke stopper. It trims up to 50 mm at the rear, giving a usable end-position window of 10-60 mm. The direct replacement is the MBLJ25X60-50S, matching the bore, stroke, adjust code, G1/8 port and mounting.
Two key upgrade facts apply. First, the adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. Second, this MALJ has threaded covers and uses a CS1-M / DS1-M magnet switch, whereas the MBLJ replacement features a riveted rolling-packed body and uses CMSG / DMSG / EMSG switches. The cushion is a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X60-50S |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Adjustable window | 10 – 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X60-50S carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X60-50S matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×60 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 10–60 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S Is Used
Dispenser Valve Height
Fine-tune the retraction window of a syringe dispenser on an SMT line; the 50 mm rear stop lets you adjust the nozzle lift precisely for different epoxy viscosities.
Wire Forming Pin
Act as an adjustable depth stop on a CNC wire bender, trimming the stroke window down to 10 mm so the 206 N pull reliably extracts the mandrel without stressing the wire.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S with MBLJ25X60-50S
To replace this MALJ25X60-50S, order the exact MBLJ25X60-50S direct. Confirm the 25 mm bore, 60 mm stroke, 50 mm adjust code, G1/8 PT port, M10x1.25 rod thread, and FA or LB mounting (there is no back cover or SDB option). Note the -S magnet sensor family changes from CS1-M / DS1-M to CMSG / DMSG / EMSG. The rear adjuster is a stop, not a load lock.
At 60 mm stroke, side-load risk is low, but always guide the rod to prevent bending.
Upgrade checklist
- ✓ Order the MBLJ25X60-50S (same bore/stroke/adjust)
- ✓ Same 10–60 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X60-50S instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S FAQ
Yes, the MALJ25X60-50S is discontinued. The direct replacement is the MBLJ25X60-50S, which matches the 25 mm bore, 60 mm stroke, 50 mm adjust code, G1/8 port, and mounting. You must upgrade your sensors from CS1-M / DS1-M to CMSG / DMSG / EMSG switches.
The 50 mm adjust code lets you trim up to 50 mm at the rear, giving a usable end-position window of 10-60 mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X60-50S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X60-50S → MBLJ25X60-50S)
Tell us the quantity and destination — we quote the direct MBLJ25X60-50S replacement with price, stock and lead time, usually within 7-8 hours.