This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X80-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 30 to 80 mm. This model is discontinued — the direct replacement is the MBLJ25X80-50.
- BoreØ25 mm
- Stroke80 mm
- Adjust window30–80 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X80-50
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50
The AirTAC MALJ25X80-50 is a discontinued double-acting mini cylinder with a 25mm bore and an 80mm stroke. It lets you trim the rear travel by up to 50mm, creating a usable end-position window from 30mm to 80mm without bolting on external stops. The direct replacement is the MBLJ25X80-50, matching the bore, stroke, 50mm adjuster, and G1/8 port.
This SKU lacks the -S magnet, so it cannot accept a position sensor. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. End impact is softened by a fixed rubber bumper, as there is no adjustable air cushion. The original MALJ uses threaded covers and a CS1-M/DS1-M sensor track, while the MBLJ upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG switches.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X80-50 |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Adjustable window | 30 – 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X80-50 carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X80-50 matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 30–80 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 Is Used
Bottle Capper Head
Fine-tune the downward travel on a rotary bottle capping machine to apply exact torque without crushing plastic caps, adjusting the stroke on the fly without swapping hardware.
Leather Pressing Arm
Regulate the pressing stroke on an industrial leather embossing press to vary imprint depth, utilizing the 206N pull force to retract the tooling cleanly.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 with MBLJ25X80-50
To replace the MALJ25X80-50, order the exact direct replacement MBLJ25X80-50, confirming the 25mm bore, 80mm stroke, 50mm adjust code, PT G1/8 port, and FA/LB mounting (no back cover or SDB). Remember the adjuster is a stop, not a lock. Since this is a no-S SKU, it cannot take a sensor, but upgrading to the MBLJ with an -S code enables CMSG/DMSG/EMSG switches.
Upgrade checklist
- ✓ Order the MBLJ25X80-50 (same bore/stroke/adjust)
- ✓ Same 30–80 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X80-50 instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 FAQ
Yes, the MALJ25X80-50 is discontinued. The direct replacement is the MBLJ25X80-50, which matches the 25mm bore, 80mm stroke, 50mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and uses CMSG/DMSG/EMSG sensors if you specify the -S magnet code.
The -50 adjust code allows you to trim up to 50mm at the rear, creating a usable stroke window from 30mm to 80mm. The adjuster acts as a travel stop, not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X80-50 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X80-50 → MBLJ25X80-50)
Tell us the quantity and destination — we quote the direct MBLJ25X80-50 replacement with price, stock and lead time, usually within 7-8 hours.