This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X225-30S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S
The AirTAC MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 195 to 225 mm. This model is discontinued — the direct replacement is the MBLJ32X225-30-S.
- BoreØ32 mm
- Stroke225 mm
- Adjust window195–225 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X225-30-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S
The AirTAC MALJ32X225-30-S is a discontinued double-acting double-rod mini cylinder with a rear adjustable stroke stopper. The 30mm adjust code trims the end position, giving a usable reach window of 195-225mm. The direct replacement is the MBLJ32X225-30-S, matching the bore, stroke, port, and mounting.
This -S SKU includes a magnet for CS1-M or DS1-M switches; the MBLJ upgrade switches to CMSG/DMSG/EMSG sensors. The MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. A fixed rubber bumper absorbs end impact, but the adjuster is a travel stop, not a lock, so it will not hold a load without live air.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X225-30-S |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Adjustable window | 195 – 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X225-30-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X225-30-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×225 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 195–225 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S Is Used
Aluminum profile cutoff saw
Fine-tune the 225mm extension to trim extrusion lengths accurately while the fixed rubber bumper absorbs the saw carriage impact.
Carton flap folder
Adjust the 30mm rear stopper to match varying box heights, applying 346N pull to tuck flaps without crushing the cardboard.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S with MBLJ32X225-30-S
To replace the MALJ32X225-30-S, order the MBLJ32X225-30-S. Confirm the 32mm bore, 225mm stroke, 30mm adjust code, G1/8 port, and M10x1.25 rod thread. Mounting is FA or LB only, with no back cover or SDB. The -S magnet requires a sensor family change from CS1-M/DS1-M to CMSG/DMSG/EMSG. The adjuster sets the end position but does not hold load without air.
At 225mm stroke, watch rod bending under side loads and guide the load externally.
Upgrade checklist
- ✓ Order the MBLJ32X225-30-S (same bore/stroke/adjust)
- ✓ Same 195–225 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X225-30-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S FAQ
Yes, the MALJ32X225-30-S is discontinued. The direct replacement is the MBLJ32X225-30-S, matching the 32mm bore, 225mm stroke, 30mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and changes the -S magnet sensor family from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 30mm adjuster lets you trim the 225mm stroke, yielding a usable end-position window of 195-225mm. The adjuster is a travel stop, not a lock, so it cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X225-30-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-30-S → MBLJ32X225-30-S)
Tell us the quantity and destination — we quote the direct MBLJ32X225-30-S replacement with price, stock and lead time, usually within 7-8 hours.