This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 30mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA
The AirTAC MTAL32X30SCA is a discontinued single-acting pull-type mini cylinder. Air retracts the rod, while an internal spring extends it, meaning the fail-safe home position is fully extended. It delivers a usable pull force of 261.2 N at 0.5 MPa. The exact drop-in replacement is the MTBL32X30SCA, matching the 32 mm bore, 30 mm stroke, and G1/8 port.
This SKU features a -S magnet for CS1-M or DS1-M switches; the MTBL replacement upgrades to CMSG, DMSG, or EMSG sensors. The MTAL uses threaded covers, whereas the MTBL features a riveted rolling-packed body. The CA back cover provides a pivot clevis for arcing loads. Apply no external load on the spring extend stroke.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA Is Used
Packaging Flap Tensioning
Pulls a cardboard carton flap taut during automated tape sealing, using the 261.2 N pull force at 0.5 MPa before spring-extending to release.
Lathe Chuck Drawbar
Retracts the drawbar to open a lathe collet chuck; the spring-extend fail-safe safely ejects the part on air loss.
Welding Fixture Pin Pull
Withdraws a locating pin on a robotic welding jig; the CA pivot clevis accommodates slight misalignment during the 30 mm pull.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA
To replace this MTAL32X30SCA, install the MTBL32X30SCA. Confirm the 32 mm bore, 30 mm stroke, G1/8 port, M10x1.25 rod thread, CA pivot cover, and the sensor swap from CS1-M/DS1-M to CMSG/DMSG/EMSG. Remember the 0.2 MPa minimum operating pressure and that the fail-safe home is extended.
If sizing up or down, step down to the 25 mm bore for 137.2 N of pull at 0.5 MPa, or step up to the 40 mm bore for 439.4 N at 0.5 MPa. The fixed rubber bumper absorbs end-of-stroke shock. For any stroke approaching 100 mm, mind side-load and rod-bending limits.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA FAQ
Yes, the MTAL32X30SCA is discontinued. The exact drop-in replacement is the MTBL32X30SCA, matching the 32 mm bore, 30 mm stroke, CA cover, and force class. You must swap your CS1-M/DS1-M sensors for CMSG/DMSG/EMSG switches.
It is a single-acting pull cylinder with a fail-safe EXTENDED home. The usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. Minimum operating pressure is 0.2 MPa. It cannot hold a load mid-stroke without an external lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X30SCA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X30SCA replacement with price, stock and lead time, usually within 7-8 hours.