This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA
The AirTAC MTAL32X75SCA is a discontinued single-acting pull cylinder with a 32mm bore and 75mm stroke. Air retracts the rod, while an internal spring extends it. It delivers a usable pull force of 261.2 N at 0.5 MPa. The exact drop-in replacement is the MTBL32X75SCA.
This MTAL32X75SCA features a magnet (-S) for CS1-M / DS1-M switches; the MTBL replacement uses CMSG / DMSG / EMSG sensors. The MTAL has threaded covers, whereas the MTBL uses a riveted rolling-packed body. The CA back cover provides a pivot/clevis mount that swings on a pin for arcing loads. A fixed rubber bumper absorbs end-of-stroke impact.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA Is Used
Packaging Flap Folding
Pulls a cardboard flap down on a case erector using 261.2 N at 0.5 MPa, letting the spring extend to release the panel between cycles.
Lathe Chuck Guard
Retracts a safety door clear of the CNC working area; the spring-extended fail-safe immediately covers the spindle upon air loss.
Textile Bale Tensioning
Draws a wire tie tight on a cotton bale press, using the CA pivot mount to absorb angular deflection during the pull stroke.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA
To replace the MTAL32X75SCA, order the MTBL32X75SCA. Confirm the 32mm bore, 75mm stroke, G1/8 port, PT thread, CA pivot back cover, and magnet (sensor family changes from CS1-M / DS1-M to CMSG / DMSG / EMSG). Remember the 0.2 MPa minimum operating pressure. The fail-safe home is EXTENDED, so apply no external load on the spring extend stroke.
For sizing, step down to the 25mm bore (137.2 N pull @0.5 MPa) for lighter jobs, or step up to the 40mm bore (439.4 N pull @0.5 MPa) for heavier tension. At 75mm stroke, manage side loads to prevent rod bending.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA FAQ
Yes, the MTAL32X75SCA is discontinued. The exact drop-in replacement is the MTBL32X75SCA, matching the 32mm bore, 75mm stroke, G1/8 port, and CA pivot mount.
It is a single-acting pull cylinder with a fixed rubber bumper. The usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa (max 40.7 kgf). The fail-safe home is EXTENDED, requiring a minimum of 0.2 MPa to retract the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCA replacement with price, stock and lead time, usually within 7-8 hours.