Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100
The AirTAC PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 150mm stroke with a 100mm fine-adjustable window — settable from 50 to 150mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke150 mm
- Adjust window100 mm
- Effective range50–150 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100
The AirTAC PBJ16X150-100 is a double-acting, double-rod pen-size mini cylinder with a 100mm adjustable window. A rear adjuster screw and lock nut shorten the retract end, giving an effective stroke range of 50-150mm. The extend end remains fixed. The M5x0.8 port and Ø5mm stainless rod handle coaxial thrust, while a fixed TPU bumper cushions each end.
Because the adjuster imposes zero force penalty, you can dial in the exact return position without reordering hardware. The slim SUS304 body saves space in tight jigs and light end-of-arm tooling.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 150 mm |
| Adjustable window | 100 mm (50–150 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -100 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 Is Used
Changeover Fixtures
Dial in the exact retract position from 50 to 150mm during product changeovers without machining new stop collars or swapping cylinders.
Trial Insertion Stops
Fine-tune the return depth on test presses to find the optimal insertion point before locking down the final production sequence.
Variable Depth Pressing
Adjust the back position on the fly for light-duty pressing tasks that require different retraction lengths across multiple part families.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 the Right Cylinder?
Remember that only the retract position is settable via the M5x0.8 adjuster screw, so your extend end layout must be fixed. Always re-tighten the lock nut after tuning, as vibration can drift an unlocked screw. Confirm your ordering essentials: 16mm bore, 150mm nominal stroke, 100mm window, no magnet, and any LB or FA mount.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 50–150 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100 FAQ
The effective stroke range is 50-150mm (150mm nominal minus up to 100mm via the rear adjuster). The M5x0.8 port and Ø5mm rod remain standard.
The M5x0.8 rear screw shortens only the retract end of the stroke, while the extend end stays fixed. You set the desired length on the machine and then re-tighten the lock nut to prevent vibration drift. The cylinder does not hold position on air loss, so an external rod lock is needed for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.