Airtac SAI160 Standard Cylinder SAI160AX200S
The AirTAC SAI160 Standard Cylinder SAI160AX200S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160AX200S
The AirTAC SAI160X200-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty operations, providing a substantial push force of 10053 N at 0.5 MPa and 14074 N at 0.7 MPa. Its 200 mm stroke is well-suited for high-mass automation tasks requiring substantial linear thrust over a moderate distance.
This specific configuration includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance in demanding environments. It is equipped with a -S magnet for seamless integration with CMSE or DMSE reed sensors, which mount directly into the dual sensor grooves on the extruded aluminum barrel. The ports are PT (tapered) thread type.
Airtac SAI160 Standard Cylinder SAI160AX200S Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160AX200S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160AX200S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160AX200S Is Used
Heavy Metal Stamping
Provides the 14074 N force at 0.7 MPa needed to drive large stamping presses and form thick metal components.
Large Injection Molding
Rigorous force output for operating large molds and ejecting heavy finished plastic products from industrial presses.
Bulk Material Diverter
Shifts heavy loads or bulk material diverters on robust conveyor systems where high impact and mass are present.
Is the Airtac SAI160 Standard Cylinder SAI160AX200S the Right Cylinder?
If 10053 N of push force at 0.5 MPa is insufficient, stepping up to the 200 mm bore yields 15708 N, while dropping down to the 125 mm bore offers 6136 N. For this 200 mm stroke, side loads are less of a concern than with longer extensions, but always ensure rigid mounting to prevent rod-bearing wear.
This model serves as a direct dimensional direct replacement for any ISO 15552 cylinder with a 160 mm bore, 200 mm stroke, PT G3/4 ports, and a magnet. Be aware that standard double-acting cylinders lose their position when air pressure is removed; if your application requires fail-safe load holding, consider the SAIL or BSAI variant instead of relying on the adjustable air cushions, which only decelerate the piston near stroke end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160AX200S FAQ
At 0.5 MPa, the push force is 10053 N and the pull force is 9425 N. At 0.7 MPa, the push force increases to 14074 N.
No, the standard SAI cylinder will drift or drop if pressure is lost. The adjustable air cushions only decelerate the piston at stroke ends. For fail-safe load holding, use the SAIL (air-released lock) or BSAI (clamp-lock) variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160AX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.