Airtac SAI160 Standard Cylinder SAI160BX475
The AirTAC SAI160 Standard Cylinder SAI160BX475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 475mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke475 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160BX475
The AirTAC SAI160X475 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. Delivering a robust 14074 N of push force at 0.7 MPa, this 160mm bore unit is built to move substantial masses. The 475mm stroke provides the extended travel distance required for large-scale material handling and forming operations.
This model features a SUS304 stainless steel rod (material code B), offering superior corrosion resistance for humid or chemically active manufacturing spaces. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible CMSE or DMSE switch mounting, though a magnet is not specified for this configuration.
Airtac SAI160 Standard Cylinder SAI160BX475 Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160BX475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160BX475
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160BX475 Is Used
Heavy Stamping
Generates the 14074 N push force required to drive large metal forming and stamping presses in automotive lines.
Large Press Triggers
Provides reliable 475mm linear actuation to actuate massive mechanical press triggers and heavy safety gates.
Pallet Handling
Lifts and positions fully loaded pallets in high-throughput automated warehousing systems where high force is mandatory.
Is the Airtac SAI160 Standard Cylinder SAI160BX475 the Right Cylinder?
Step down to a 125mm bore if your application only requires 8590 N at 0.7 MPa, but the 160mm class is necessary when pushing past 10 kN. Because this 475mm stroke exceeds 300mm, side-load on the rod bearing becomes a primary concern; an external guide rail or a dedicated guided cylinder should be used to prevent rod bending under heavy offset loads.
If the machinery loses air pressure, the piston will drift and cannot hold a vertical load in place. For fail-safe position holding, integrate the SAIL variant with an air-released lock, or specify the BSAI bidirectional clamp-lock cylinder. This SAI160X475 uses a PT G3/4 port, an M36x2 rod thread, and is dimensionally interchangeable with any standard ISO 15552 mounting interface using TC trunnion or FA flange accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160BX475 FAQ
At an operating pressure of 0.7 MPa, the SAI160X475 provides a push force of 14074 N and a pull force of 9425 N. The maximum theoretical force at 1.0 MPa is 2050 kgf.
Yes, the SAI160X475 is a genuine ISO 15552 profile cylinder, making its mounting dimensions a direct replacement for other ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160BX475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.