Airtac SAI160 Standard Cylinder SAI160BX65S
The AirTAC SAI160 Standard Cylinder SAI160BX65S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 65mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke65 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160BX65S
The AirTAC SAI160X65-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. Delivering a robust 10053 N of push force at 0.5 MPa, this 160 mm bore unit is built to execute demanding high-thrust tasks. The 65 mm stroke provides rapid, concentrated actuation for operations requiring immediate power transfer.
This specific configuration features a SUS304 stainless steel piston rod, ensuring superior corrosion resistance for harsh or washdown environments. Equipped with a magnet for position sensing, it integrates seamlessly with CMSE and DMSE switches via the dual sensor grooves on the extruded aluminum barrel. Fluid connections use PT tapered ports, ensuring a secure, leak-free pneumatic seal.
Airtac SAI160 Standard Cylinder SAI160BX65S Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160BX65S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160BX65S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160BX65S Is Used
Heavy Stamping
Provides the intense 10053 N push force required for metal forming, riveting, and heavy stamping operations.
Automated Clamping
Ideal for securing large automotive or aerospace components during machining, utilizing its SUS304 rod for corrosive resistance.
High-Force Ejection
Executes rapid 65 mm ejection strokes in injection molding and heavy press lines, ensuring swift part release.
Is the Airtac SAI160 Standard Cylinder SAI160BX65S the Right Cylinder?
Selecting this 160 mm bore cylinder is optimal when an application demands over 10000 N of thrust at 0.5 MPa, bridging the gap between the 80 mm bore (2513 N) and the massive 200 mm bore (15708 N). Because the 65 mm stroke is relatively short, side-load risks are minimal, though ensuring precise rod alignment remains critical to prevent premature wear on the rod bearing.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders of the same bore. Key parameters to verify for your mounting setup include the 160 mm bore, 65 mm stroke, G3/4 port size, PT thread type, and the included magnet (-S). Note that the standard adjustable air cushions at both ends decelerate the piston but do not hold loads; if your application requires position holding without live air pressure, consider the SAIL or BSAI variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160BX65S FAQ
At a 0.5 MPa operating pressure, this 160 mm bore cylinder generates 10053 N of push force and 9425 N of pull force. At 0.7 MPa, the push force increases to 14074 N.
Yes, the SAI160X65-S is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 standard cylinders of the same bore and stroke. It features a G3/4 port and a SUS304 rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160BX65S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.