Airtac SAI50 Standard Cylinder SAI50AX175S
The AirTAC SAI50 Standard Cylinder SAI50AX175S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke175 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI50 Standard Cylinder SAI50AX175S
The AirTAC SAI50X175-S is a double-acting ISO 15552 profile cylinder featuring a 50mm bore and 175mm stroke. It provides a push force of 982 N at 0.5 MPa, making it well-suited for medium-duty handling and clamping tasks. The extruded aluminum barrel design omits tie rods for a clean exterior.
This specific configuration includes a SUS420J2 stainless steel rod for enhanced corrosion resistance in humid environments. Equipped with a magnet (-S), it supports CMSE and DMSE proximity switches mounted directly into the dual sensor grooves on the barrel sides.
Airtac SAI50 Standard Cylinder SAI50AX175S Technical Specifications
| Model | Airtac SAI50 Standard Cylinder SAI50AX175S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI50 Standard Cylinder SAI50AX175S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI50 Standard Cylinder SAI50AX175S Is Used
Component Clamping
Secures aluminum die-cast parts during CNC machining, utilizing its 982 N push force to hold workpieces firmly against locators.
Package Diversion
Actuates a routing arm on a packaging conveyor to sort medium-weight cartons into secondary processing lanes.
Press Ejection
Pushes completed stamped metal blanks out of a low-tonnage press within a 175mm travel distance.
Is the Airtac SAI50 Standard Cylinder SAI50AX175S the Right Cylinder?
If an application requires slightly less thrust, stepping down to a 40mm bore yields 628 N at 0.5 MPa. For heavier loads, the 63mm bore provides 1559 N. At 175mm stroke, side-load stress on the rod bearing is moderate but manageable; ensure linear motion guidance to prevent premature wear.
As a true ISO 15552 cylinder, this model is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a PT tapered G1/4 port, a 20mm rod, and 30mm adjustable cushions at both ends. Remember that the integrated air cushions only decelerate the piston near stroke ends; they do not hold a load if air pressure is lost. For position holding without live pressure, consider the SAIL locking variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI50 Standard Cylinder SAI50AX175S FAQ
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At the maximum operating pressure of 1.0 MPa, the theoretical push force reaches 1767 N.
Yes, the SAI50X175-S shares the exact ISO 15552 mounting interface and center-to-center dimensions, allowing it to function as a direct replacement for any standard 50mm ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI50 Standard Cylinder SAI50AX175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.