Airtac SAUD Double Rod Cylinder SAUD100X1000S
The AirTAC SAUD Double Rod Cylinder SAUD100X1000S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 1000mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke1000 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X1000S
The AirTAC SAUD100X1000S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side area. The output force is identical in extension and retraction, delivering 3681 N each way at 0.5 MPa. The body is noticeably shorter than a standard ISO 15552 unit of the same bore. This -S SKU includes a piston magnet for CMSG, DMSG, or EMSG switches.
With a 1000mm stroke, external side-load guidance is essential to prevent rod bending. The 1/2" port and M20x1.5 rod thread handle high flow. Viton H seals can raise the operating ceiling to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X1000S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X1000S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X1000S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X1000S Is Used
Twin-Tool Machining Station
Drives two opposing machining heads simultaneously with identical 3681 N force, keeping cycle times balanced without needing separate valves.
Dual-End Transfer Pusher
Uses both rod ends to push pallets on parallel lanes, ensuring perfectly synchronized material transfer over the long 1000mm stroke.
Vertical Lift Fixture
Lifts heavy fixtures vertically using the equal pull force, while the back rod trips a DMSG sensor to confirm the exact bottom position.
Is the Airtac SAUD Double Rod Cylinder SAUD100X1000S the Right Cylinder?
Choose this 100mm bore if you need substantial equal force both ways for non-rotating or twin-tool tasks. It yields 3681 N at 0.5 MPa. Sizing down, the 80mm bore provides 2268 N. Sizing up is not possible as 100mm is the maximum. The dual rods prevent twist and let you mount a sensor cam on the back end. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. Because the stroke is 1000mm, you must use external guides to avoid rod bending. Remember that air cushions only decelerate; use an external rod lock or pilot-operated check valve to hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X1000S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2" port supplies the air required for this 100mm bore.
The dual rods provide anti-rotation guidance and allow mounting a sensor cam on the back end. For a 1000mm stroke, you must add external guides to prevent rod bending. The -S magnet enables CMSG or EMSG switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.