Airtac SAUD Double Rod Cylinder SAUD100X300
The AirTAC SAUD Double Rod Cylinder SAUD100X300 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 300mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke300 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X300
The AirTAC SAUD100X300 is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area. Output is equal both ways at 3681 N at 0.5 MPa. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore.
This 100 mm bore unit uses a 1/2 inch port and M20x1.5 rod threads. The equal force makes it ideal for non-rotating anti-twist guidance or driving two tools. Without a magnet, this SKU cannot take a sensor.
Airtac SAUD Double Rod Cylinder SAUD100X300 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X300 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X300
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X300 Is Used
Twin-Tool Stamping
Drives two matched forming tools simultaneously from opposite rod ends, ensuring perfectly synchronized press cycles.
Dual-End Diverters
Powers a sorting gate from both sides to prevent mechanical twisting during high-speed package routing.
Symmetric Lift Platforms
Lifts heavy pallets evenly using both rod ends, maintaining parallel load balance without external guides.
Is the Airtac SAUD Double Rod Cylinder SAUD100X300 the Right Cylinder?
Choose this 100 mm bore delivering 3681 N each way when your application needs anti-rotation or twin tooling. If sizing down, the 80 mm bore provides 2268 N. If sizing up, no larger standard bore exists in this series. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. At 300 mm stroke, add external guides to prevent rod bending under side loads. This SKU lacks a magnet, so it cannot accept CMSG or DMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X300 FAQ
Force is equal both ways because a rod exits both ends. It delivers 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to achieve these figures.
No. A plain cylinder drifts on air loss or when the valve is centered. The adjustable 29 mm cushions only decelerate near stroke end. For a held load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.